We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray galvanized steel electrical enclosure 10 by 10 by 4 inches with screw cover

HOFFMAN

HOFFMAN ASG10X10X4NK Electrical Box 10 in 4 in

SKU CH-A9KS-RZS6T

A wall-mount carbon-steel electrical enclosure measuring 10 by 10 by 4 inches with a screw-on solid cover, galvanized finish and captive screw latches, rated NEMA Type 1 and IP30

  • TypeElectrical Enclosures, Wireways & Covers
  • NEMA 1 rating protects indoor wiring
  • IP30 rating shields against solid objects
  • Galvanized steel resists corrosion
  • Captive screw cover secures quickly
  • Wall-mount holes simplify installation

Enclosure dimensions and rating

This carbon-steel electrical enclosure measures 10 inches high, 10 inches wide and 4 inches deep with a NEMA Type 1 and IP30 rating. It provides indoor protection against falling dirt and non-corrosive liquids for general-purpose wiring.

Gauge range and mounting

The box uses 12, 14 or 16 gauge steel and includes mounting holes for wall installation. The solid screw-on cover with captive screw latches secures the interior while allowing straightforward access during maintenance.

Standards compliance

The enclosure is cUL listed per CSA C22.2 No 40 and UL 50, 50E listed with file number E27525, and meets IEC 60529 requirements. These certifications confirm suitability for standard indoor electrical installations.

Highlights

  • NEMA 1 rating protects indoor wiring
  • IP30 rating shields against solid objects
  • Galvanized steel resists corrosion
  • Captive screw cover secures quickly
  • Wall-mount holes simplify installation

Specifications

BrandNVENT HOFFMAN
TypeElectrical Enclosures, Wireways & Covers

Questions about this item

Will the 10-inch height and 4-inch depth fit beside my existing NEMA 1 enclosures?

Yes, the 10-inch height and 4-inch depth match standard NEMA Type 1 dimensions, so it aligns with other A90P1 series boxes on the same wall.

How can I confirm the IP30 rating is met after installation?

Verify the solid cover sits flush, all captive screws are fully seated, and no cable entries breach the gasket surface.

Does the box include mounting hardware or must I buy screws separately?

The enclosure has pre-drilled mounting holes; mounting screws and anchors are not supplied and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.