We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray powder-coated steel electrical enclosure with screw-on cover and captive screws, 8 inches high by 3.5 inches deep

HOFFMAN

HOFFMAN A806SC Electrical Box 8 in H 3.5 in D

SKU CH-ATG6-7JPM2

Wall-mount steel enclosure rated NEMA 12 and 13 with IP65 protection, 8 in height, 3.5 in depth, powder-coated gray finish, neoprene gasket.

  • TypeElectrical Enclosures, Wireways & Covers
  • NEMA 12 and 13 rating protects against dust and water ingress
  • IP65 enclosure rating seals out jets and fine particles
  • Powder-coated steel body resists corrosion in harsh environments
  • Captive screw cover allows fast access without lost hardware
  • Weld nuts accept interior panel 32FR93 for quick component mounting

Compact steel enclosure for indoor wiring

The HOFFMAN A806SC is a wall-mount steel enclosure rated NEMA 12 and 13 with IP65 protection. It suits indoor industrial or commercial wiring where dust, lint and non-corrosive liquids are present. The gray powder-coated finish resists corrosion in typical indoor environments.

Verify mounting depth and panel compatibility

Confirm the 3.5 in depth fits your available wall space and cable bend-radius requirements. The enclosure uses screw-on cover closure with captive screws and a neoprene gasket, so ensure the mounting surface can accept the weld nuts for panel and terminal attachment. The solid cover provides no window for visual inspection.

Replaces open or lower-rated junction boxes

This unit upgrades from basic NEMA 1 boxes when tighter ingress protection is required for indoor dust and dripping water. The 14/16 ga steel construction and weld-nut mounting panel support heavier terminal blocks than lighter enclosures. The jump is worthwhile when a solid cover and gasketed seal are specified for the installation.

Highlights

  • NEMA 12 and 13 rating protects against dust and water ingress
  • IP65 enclosure rating seals out jets and fine particles
  • Powder-coated steel body resists corrosion in harsh environments
  • Captive screw cover allows fast access without lost hardware
  • Weld nuts accept interior panel 32FR93 for quick component mounting

Specifications

BrandNVENT HOFFMAN
TypeElectrical Enclosures, Wireways & Covers

Questions about this item

Does the Hoffman A806SC enclosure ship with its cover and gasket included, or must the cover be purchased separately?

The solid cover and neoprene gasket are built into the enclosure, so the unit arrives ready to mount without buying a separate lid or seal.

Should I choose the 14/16 gauge steel version or a lighter gauge for a wall-mounted industrial panel?

The 14/16 gauge steel construction provides the rigidity needed for wall mounting and the welded nuts that secure an interior panel and terminals.

What does the IP65 rating mean when the box is installed on a factory wall?

IP65 confirms the enclosure is dust-tight and protected against low-pressure water jets from any direction when the screw-latch cover is properly fastened.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.