HOFFMAN
HOFFMAN A4AXFN2 electrical box 230V AC 100 cfm
A 230V AC axial fan delivering 100 cfm airflow for compact equipment cooling
- TypeTraffic & Parking Lot
- 100 cfm airflow for equipment cooling
- 230 V AC supply fits industrial panels
- 16/14 W draw keeps energy use low
- 37/41 dB sound level suits quiet enclosures
- Ball-bearing motor extends operating life
HOFFMAN A4AXFN2 230V AC Axial Fan
The HOFFMAN A4AXFN2 is a square axial fan rated for 230V AC operation. It delivers 100 cfm of airflow at zero static pressure for equipment cooling in compact enclosures. The cast aluminium housing and polycarbonate blades are built for traffic and parking lot environments. Ball bearings support continuous duty cycles.
Suits tight enclosure cooling.
This fan fits builders who need a compact square unit with lead-wire connections for direct mounting in small cabinets. The 37 to 41 sound level range suits noise-sensitive installations. Buyers who require an IP rating for wash-down or outdoor exposure should look elsewhere. The lack of duct flanges makes it unsuitable for pressurised airflow paths.
100 cfm at zero static pressure decides fit
The single figure that determines suitability is the 100 cfm rating measured at .000 inches of static pressure. If the enclosure presents measurable back-pressure, actual airflow will drop below this value. The 16 and 14 watt power draw at 230V AC sets the circuit load. No IP rating means the installer must provide separate ingress protection.
Highlights
- 100 cfm airflow for equipment cooling
- 230 V AC supply fits industrial panels
- 16/14 W draw keeps energy use low
- 37/41 dB sound level suits quiet enclosures
- Ball-bearing motor extends operating life
Specifications
| Brand | HOFFMAN |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
What airflow does the 230V AC axial fan deliver at zero static pressure?
The fan moves 100 cfm at .000 in. SP, making it suitable for compact enclosure cooling.
What are the exact mounting dimensions of the square housing?
The cast-aluminium housing measures 4 5/8 in wide by 4 5/8 in high with a depth of 1 33/64 in.
How are the lead wires connected during installation, and what mistake should be avoided?
Connect the lead wires to a 230V AC supply; the common error is reversing polarity on the ball-bearing motor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



