We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HOFFMAN

HOFFMAN A202010LP NEMA 12/13 Wall Mount Enclosure 20x20x10 in

SKU CH-TWKM-HH13Y

Wall-mount carbon-steel enclosure rated NEMA 12/13 and IP65, 20×20×10 in, hinged cover with screw-down clamps and neoprene gasket

  • TypeElectrical Boxes & Enclosures
  • NEMA 12/13 and IP65 ratings protect against dust and water ingress
  • Carbon steel body with ANSI 61 powder finish resists corrosion in harsh environments
  • Hinged cover with screw-down clamps and neoprene gasket enables secure, repeatable access
  • Wall-mount design with pre-drilled holes simplifies installation on vertical surfaces
  • Includes 32FT35 interior panel for ready component mounting

HOFFMAN A202010LP NEMA 12/13 Enclosure

This wall-mount enclosure houses electrical components in industrial and commercial settings. It carries NEMA 12 and 13 ratings plus IP65 protection against dust, dirt and non-pressurised water. The carbon-steel body uses 14/16 gauge material with an ANSI 61 polyester powder finish in gray. A hinged cover secured by screwdown clamps and a neoprene gasket seals the interior.

20×20×10 inch capacity with interior panel 32FT35

The 20.0 in height, 20.0 in width and 10.0 in depth provide room for terminal blocks, relays and small controllers. The included 32FT35 interior panel adds a mounting surface for DIN rail or back-plate components. The enclosure handles moderate cable counts and standard control gear, but deeper devices or large busbars will exceed the 10.0 in depth limit.

Upgrades from open frames or NEMA 1 enclosures

Installers move to this model when dust, oil mist or wash-down spray threaten unprotected gear. The jump is worth it when UL, cUL, CSA and IEC listings are required for inspection approval. It does not suit applications needing larger cut-out areas, sub-panel depths beyond the supplied panel, or environments demanding NEMA 4X corrosion resistance.

Highlights

  • NEMA 12/13 and IP65 ratings protect against dust and water ingress
  • Carbon steel body with ANSI 61 powder finish resists corrosion in harsh environments
  • Hinged cover with screw-down clamps and neoprene gasket enables secure, repeatable access
  • Wall-mount design with pre-drilled holes simplifies installation on vertical surfaces
  • Includes 32FT35 interior panel for ready component mounting

Specifications

BrandNVENT HOFFMAN
TypeElectrical Boxes & Enclosures

Questions about this item

Will the 20.0 in by 20.0 in interior panel 32FT35 accept the DIN-rail gear I already use?

The interior panel 32FT35 fits the 20 in by 20 in enclosure and provides standard mounting holes for DIN-rail equipment.

How do I verify the IP65 seal is intact after I close the screwdown clamps?

Check that the neoprene gasket sits evenly around the door and that all screwdown clamps are firmly tightened; the IP65 rating is met when the gasket is fully compressed.

Does the box include the interior panel 32FT35 or must I order it separately?

The interior panel 32FT35 is listed as a feature of this enclosure, so it ships inside the box; no separate purchase is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.