We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray powder-coated carbon steel wall-mount enclosure with hinged solid cover and screw-down clamps

HOFFMAN

HOFFMAN A161608LP Electrical Box 16x16x8 IP65

SKU CH-83T7-EZNCK

Wall-mount carbon-steel enclosure with hinged cover, clamps and IP65 rating

  • TypeElectrical Enclosures, Wireways & Covers
  • NEMA 12 and 13 rated for industrial dust and water protection
  • IP65 enclosure resists low-pressure jets and ingress
  • 14/16 ga carbon steel with powder coat finish for durability
  • Hinged cover with screw-down clamps and padlocking hasp for secure access
  • Wall-mount design with pre-drilled holes and neoprene gasket included

HOFFMAN A161608LP electrical enclosure

The HOFFMAN A161608LP is a carbon steel electrical enclosure rated NEMA 12 and 13 with an IP65 ingress protection rating. It measures 16 inches in height and width with an 8 inch depth. The enclosure features a hinged solid cover secured by screw-down clamps with a padlocking hasp. It includes a neoprene gasket, mounting holes and a powder coated gray finish.

Clamps and panel change access and security

The screw-down clamps with padlocking hasp provide a secure closure method that can be locked to prevent unauthorised access. The hinged cover allows the door to swing open for maintenance while remaining attached to the body. An interior panel, part number 32FT28, is included for mounting components inside the enclosure. The 14/16 gauge steel construction and neoprene gasket maintain the environmental seal when the cover is closed.

Suits wall mounted industrial control applications

This enclosure suits applications requiring a wall mounted, lockable steel box with a solid cover for protecting electrical components in indoor industrial environments. It is not suitable for buyers who need a transparent cover for visual inspection without opening the door. It is also not for installers who require a larger or smaller footprint than the 16 by 16 inch dimensions. Outdoor installations needing a higher IP rating should look elsewhere.

Highlights

  • NEMA 12 and 13 rated for industrial dust and water protection
  • IP65 enclosure resists low-pressure jets and ingress
  • 14/16 ga carbon steel with powder coat finish for durability
  • Hinged cover with screw-down clamps and padlocking hasp for secure access
  • Wall-mount design with pre-drilled holes and neoprene gasket included

Specifications

BrandNVENT HOFFMAN
TypeElectrical Enclosures, Wireways & Covers

Questions about this item

How often will the neoprene gasket need replacement to keep the IP65 seal?

The neoprene gasket maintains the IP65 rating; inspect it during routine maintenance and replace if it shows cracking or compression set.

What limits continuous operation inside the 14/16 ga carbon-steel enclosure?

Heat dissipation through the solid cover and powder-coated walls is the first limit during sustained loads.

How much noise or heat does the A161608LP produce when wall-mounted all day?

The enclosure itself generates no noise or heat; internal components determine thermal and acoustic output.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.