We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray carbon steel wall-mount enclosure with hinged solid cover and screwdown clamps

HOFFMAN

HOFFMAN A16106CH NEMA 12/13 16x10x6 Wall Mount Electrical Box

SKU CH-DE00-MX5TN

Wall-mount carbon-steel enclosure rated NEMA 12, 13 and IP65, 16.0 in high, 10.0 in wide, 6.0 in deep, with hinged solid cover, screw-down clamps and neoprene gasket

  • TypeElectrical Boxes
  • NEMA 12 and 13 rating protects against dust and water ingress
  • Carbon steel body with ANSI 61 polyester powder finish resists corrosion
  • Hinged solid cover with screw-down clamps ensures secure sealing
  • IP65 rating confirms protection from jets and dust
  • Weld nuts allow direct panel and terminal mounting inside

NEMA 12/13 Rated Wall Mount Enclosure

This Hoffman A16106CH enclosure provides a NEMA 12 and 13 rated wall mount solution for indoor electrical components. The carbon steel body carries a gray ANSI 61 polyester powder finish. It includes a neoprene gasket and screwdown clamps on a hinged solid cover. The unit meets IP65, CSA, cUL, IEC and UL listed standards.

Upgrade From Open or Lower Rated Boxes

The jump is worth it when moving from unrated or NEMA 1 enclosures that lack dust, oil and non-corrosive liquid protection. The 14/16 gauge steel and welded weld nuts add rigidity for panel mounting. The screwdown clamps replace simple latches for a tighter seal. The 16.0 in height by 10.0 in width by 6.0 in depth interior gains the 32FR83 panel.

Fits Standard Wall Mount Builds

The box mounts directly to flat surfaces using the welded weld nuts provided. The hinged cover swings clear for wiring access while the clamps secure it shut. The solid cover prevents accidental contact with live parts inside. The carbon steel construction handles typical industrial environments without additional shielding. The depth accommodates terminal blocks and smaller control devices.

Highlights

  • NEMA 12 and 13 rating protects against dust and water ingress
  • Carbon steel body with ANSI 61 polyester powder finish resists corrosion
  • Hinged solid cover with screw-down clamps ensures secure sealing
  • IP65 rating confirms protection from jets and dust
  • Weld nuts allow direct panel and terminal mounting inside

Specifications

BrandHoffman
TypeElectrical Boxes

Questions about this item

What wall-mount hardware fits the 16.0 in H x 10.0 in W enclosure?

The box includes weld nuts for a mounting panel and terminals; use the panel 32FR83 to secure it to the wall.

How do I install the hinged cover and avoid a gasket leak?

Align the neoprene gasket evenly, close the hinged cover, then tighten the screwdown clamps in a cross pattern to seat the seal.

When should I replace the neoprene gasket on this NEMA 12/13 box?

Inspect the gasket annually; replace it if it shows cracking, compression set, or if the IP65 seal no longer holds water spray.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.