We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray powder-coated steel electrical enclosure with screw-on solid cover, 10 inches high, 8 inches wide, 6 inches deep

HOFFMAN

HOFFMAN A10086SC electrical box 10 in H 6 in D 8 in

SKU CH-ZCTX-JWKRB

A steel electrical enclosure with screw-on solid cover, NEMA 12/13 and IP65 ratings, powder-coated gray finish, neoprene gasket, and wall-mount design

  • TypeElectrical Enclosures, Wireways & Covers
  • NEMA 12 and 13 rating protects against dust and dripping water
  • IP65 enclosure resists water jets and solid ingress
  • Powder-coated steel body with neoprene gasket seals out contaminants
  • Captive screw latches keep the cover secured during maintenance
  • Weld nuts accept 32FR67 interior panel for quick component mounting

Steel enclosure with IP65 rating

The HOFFMAN A10086SC is a wall-mountable steel enclosure rated NEMA 12 and 13 with an IP65 rating. It suits installers who need a dust-tight and water-jet resistant cabinet for indoor electrical controls. Builders requiring a larger footprint or a different mounting style will need another solution.

Powder-coated finish with neoprene gasket

The gray powder-coated 14/16 gauge steel body and solid screw-on cover create a sealed barrier. A neoprene gasket and captive screw latches maintain the IP65 seal during normal operation. No active cooling or fan provisions are included in this design.

Weld nuts accept interior panel 32FR67

Factory weld nuts allow direct mounting of the specified 32FR67 interior panel for terminals or DIN rail gear. The Series A51SC captive screws stay with the cover to prevent lost hardware during maintenance. No additional panels, glands or mounting brackets are bundled.

Highlights

  • NEMA 12 and 13 rating protects against dust and dripping water
  • IP65 enclosure resists water jets and solid ingress
  • Powder-coated steel body with neoprene gasket seals out contaminants
  • Captive screw latches keep the cover secured during maintenance
  • Weld nuts accept 32FR67 interior panel for quick component mounting

Specifications

BrandNVENT HOFFMAN
TypeElectrical Enclosures, Wireways & Covers

Questions about this item

How do I mount the A10086SC enclosure to the wall using the weld nuts, and what step is often missed?

Align the enclosure with the wall studs, insert bolts through the weld nuts for the mounting panel and terminals, then tighten; the step often missed is seating the neoprene gasket fully before torquing the captive screws to maintain the IP65 seal.

Which component of the A10086SC will need replacement first under normal conditions?

The neoprene gasket on the solid cover will degrade over time and should be inspected periodically; replace it if compression set or cracking appears to preserve the NEMA 12 and 13 ratings.

What is the first protection limit reached during sustained exposure to dust and water jets?

The IP65 rating defines the limit: the enclosure resists dust ingress and low-pressure water jets from any direction, but it is not rated for prolonged immersion or high-pressure wash-down beyond that level.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.