Hobart
Hobart S112244-G31 1/8" E6011 Stick Electrode 50 lb
A 50 lb pack of 1/8 in carbon-steel stick electrodes rated E6011 for AC and DCEP welding in all positions
- Type1837
- Deep penetration from E6011 cellulose coating
- Works on AC and DCEP power sources
- 60 ksi tensile strength for structural joints
- 50 lb pack keeps production running
- Suitable for all welding positions
Hobart E6011 Carbon Steel Electrode
This Hobart electrode carries AWS classification E6011 and is designed for stick welding on carbon steel. It measures 1/8 in diameter by 14 in length and comes in a 50 lb package. The wire type is designated 1837.
For Maintenance and Field Repairs
Suitable for welders who need an AC or DCEP rod that runs in flat, horizontal, overhead, vertical-down and vertical-up positions on carbon steel. Not for users who require a different AWS classification, a non-carbon-steel wire, or a diameter other than 1/8 in.
AWS E6011 Classification Decides Fit
The E6011 designation sets the tensile strength at 60 ksi minimum and yield strength at 48 ksi minimum, with AC and DCEP current capability. Match this classification to your procedure qualification record before purchase.
Highlights
- Deep penetration from E6011 cellulose coating
- Works on AC and DCEP power sources
- 60 ksi tensile strength for structural joints
- 50 lb pack keeps production running
- Suitable for all welding positions
Specifications
| Brand | HOBART |
|---|---|
| Type | 1837 |
Questions about this item
How long can I run a 1/8 in E6011 rod continuously before it overheats?
The electrode is consumed during welding; continuous run time depends on your machine duty cycle and amperage setting, not on the rod itself.
Does the E6011 coating produce heavy fume or spatter during all-day welding?
E6011 electrodes generate typical SMAW fume and moderate spatter; use local exhaust ventilation and appropriate PPE for extended sessions.
What welding power source do I need to run these 1/8 in E6011 rods?
A stick welder capable of AC or DCEP output with an amperage range suitable for 1/8 in diameter electrodes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
