We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Box of 14 inch carbon steel stick electrodes 3/32 inch diameter 5 lb

Hobart

Hobart 54JK84 14" Stick Electrode 3/32" E6013 5 lb

SKU CH-9FGW-ZAKF3

E6013 carbon-steel stick electrode for AC or DC welding in all positions, 14 in length, 3/32 in diameter, 5 lb pack

  • Type1837
  • E6013 classification suits general carbon steel repairs
  • 14 in length reaches joints in tight spots
  • 3/32 in diameter fits light-gauge sheet metal
  • AC, DCEN, DCEP current works with most machines
  • All-position rating covers flat, horizontal, vertical, overhead

Hobart 54JK84 14 Inch E6013 Electrode

Hobart 54JK84 is a 14 inch stick electrode classified AWS E6013 for shielded metal welding on carbon steel. It has a 3/32 inch diameter and comes in a 5 lb package. The electrode operates on AC, DCEN, and DCEP current.

Welders Working With Carbon Steel

This electrode suits welders joining carbon steel to carbon steel in flat, horizontal, overhead, and vertical positions. It is not for buyers who need a different diameter or a classification other than E6013.

AWS E6013 Classification and 3/32 Inch Diameter

The AWS E6013 classification confirms a minimum tensile strength of 60 ksi and yield strength of 48 ksi. The 3/32 inch diameter determines the amperage range and deposition rate. Match both to your procedure and base material thickness.

Highlights

  • E6013 classification suits general carbon steel repairs
  • 14 in length reaches joints in tight spots
  • 3/32 in diameter fits light-gauge sheet metal
  • AC, DCEN, DCEP current works with most machines
  • All-position rating covers flat, horizontal, vertical, overhead

Specifications

BrandHOBART
Type1837

Questions about this item

What welding machine do I need to run these 3/32" E6013 electrodes?

A stick welder (SMAW) that can supply AC, DCEN or DCEP current and is rated for 3/32" diameter rods on carbon steel.

Will these 14" rods fit the electrode holder on my older SMAW unit?

Yes, the 3/32" diameter matches standard holders on most AC/DC stick welders used for carbon-steel work.

How can I confirm the welds meet the 60 ksi tensile rating after I finish a joint?

Inspect for smooth, uniform beads with good fusion in flat, horizontal, overhead and vertical positions; a certified tensile test is the only way to verify the 60 ksi minimum.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.