HNZXIB
HNZXIB ZNCL-T2L 2L 110V 350°C heating mantle laboratory supply
A 2 L heating mantle that heats to 350 °C and stirs up to 2000 rpm with independent controls, digital temperature display and dual inner and outer sensors for ±1 °C accuracy
- TypeHeating Plate/Mantle
- Temperature RangeRT~350°C
- Capacity2L
- Voltage110V
- Digital display with self-tuning for stable temperature control
- Independent stirring up to 2000 rpm with slow-start safety
- Dual inner and outer probes for ±1 °C accuracy
- Separate switches for heating and stirring functions
- 450 W mantle heats 2 L to boiling in 10–25 minutes
Smart magnetic heating mantle for laboratory
The HNZXIB ZNCL-T2L is a 2 L heating mantle designed for biology, medicine, chemistry and chemical engineering work. It combines electric heating with a magnetic stirrer driven by a heatproof magnet. Digital intelligence control uses inner and outer temperature probes to maintain the set point. Two independent switches operate the heating and stirring functions separately.
Temperature range reaches 380 °C with ±1 °C accuracy
The unit heats from room temperature up to 380 °C and holds the target within ±1 °C. A 450 W Cr20Ni80 furnace wire brings water to a boil in 10 to 25 minutes. The mantle is rated for continuous operation of more than 8 hours. E-glass fibre insulation withstands 450 °C for safe high-temperature use.
Stirring speed ramps slowly to 2000 rpm
A variable speed stirrer runs up to 2000 rpm and increases speed gradually to improve magnetic coupling and avoid splashing. Heating and stirring are controlled by separate switches so each function can be adjusted independently. The 110 V 50/60 Hz supply powers both systems from a single mains connection.
Highlights
- Digital display with self-tuning for stable temperature control
- Independent stirring up to 2000 rpm with slow-start safety
- Dual inner and outer probes for ±1 °C accuracy
- Separate switches for heating and stirring functions
- 450 W mantle heats 2 L to boiling in 10–25 minutes
Specifications
| Type | Heating Plate/Mantle |
|---|---|
| Temperature Range | RT~350°C |
| Capacity | 2L |
| Voltage | 110V |
Questions about this item
What does the 350 °C maximum temperature mean for everyday lab work?
The mantle reaches 350 °C, enough for most organic syntheses and solvent refluxes, while the digital controller holds the set point within ±1 °C using both internal and external probes.
How does the 110 V supply limit the heating power?
At 110 V the unit draws 450 W, so it can bring 2 L of water to a boil in roughly 10 to 25 minutes and is rated for continuous operation beyond eight hours.
What size flask fits the 2 L mantle cavity?
The cavity is built for a standard 2000 ml round-bottom flask; the Cr20Ni80 furnace wire and E-glass fibre insulation rated to 450 °C surround the flask for even heat distribution.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
