HNZXIB
HNZXIB S-50L 50L 220V Jacketed Glass Reactor laboratory supply
A 50 L jacketed glass reactor for vacuum stirring reactions with a 120 W motor reaching 600 rpm and a GG17 borosilicate vessel on a SUS304 frame
- TypeGlass Reactor
- Capacity50L
- Voltage220V
- 50 L capacity supports large-batch synthesis
- 220 V supply powers 120 W gear motor with 1500 g·cm torque
- 0–600 rpm stirring range up to 1300 rpm maximum
- GG17 high-borosilicate glass jacket enables heating or cooling circulation
- SUS304 stainless frame with bottom drain valve simplifies product recovery
50 L Jacketed Glass Reactor
The HNZXIB S-50L is a 50 L double-layer glass vessel designed for stirred reactions under vacuum or negative pressure. It operates on a 220 V 50/60 Hz supply and uses an electric stir motor with a PTFE agitator. The jacketed construction allows thermal fluid to circulate for heating or cooling the contents.
Chemists needing temperature-controlled synthesis
This reactor suits laboratories running synthetic chemistry, bio-pharmaceutical work or new material preparation where precise thermal control and vacuum stirring are required. It is not for processes that exceed the 120 W motor rating or the 1 500 g·cm torque limit. Buyers who need larger throughput or higher agitation speeds should look at other equipment.
12 mm stirring shaft with 0–600 rpm range
The stirring shaft measures 12 mm in diameter and delivers a speed range of 0 to 600 rpm, with a maximum of 1 300 rpm. This single specification determines whether the reactor can handle the viscosity and mixing demands of your specific application.
Highlights
- 50 L capacity supports large-batch synthesis
- 220 V supply powers 120 W gear motor with 1500 g·cm torque
- 0–600 rpm stirring range up to 1300 rpm maximum
- GG17 high-borosilicate glass jacket enables heating or cooling circulation
- SUS304 stainless frame with bottom drain valve simplifies product recovery
Specifications
| Type | Glass Reactor |
|---|---|
| Capacity | 50L |
| Voltage | 220V |
Questions about this item
What does the 50 L capacity mean when the reactor is running a reaction?
The 50 L figure is the nominal volume of the inner glass vessel; actual working volume will be lower to allow headspace for stirring and vapour space under vacuum.
What does the 220 V 50/60 Hz supply actually power on this unit?
It powers the 120 W gear motor that drives the 12 mm stirring shaft through the 0–600 rpm range with up to 1500 g·cm torque.
What are the physical mounting requirements for the S-50L frame?
The reactor sits on a SUS304 stainless-steel floor-standing frame; ensure the bench or floor can support the assembled weight and allow clearance for the large bottle mouth and bottom drain valve.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
