HNZXIB
HNZXIB S-30L 30L 220V Jacketed Glass Reactor laboratory supply
A 30-litre jacketed glass reactor for vacuum stirring and temperature-controlled reactions at 220 volts
- TypeGlass Reactor
- Capacity30L
- Voltage220V
- 30 L capacity handles large-batch synthesis
- GG17 high-borosilicate glass resists chemical attack
- 0–600 rpm stirring with 1300 g·cm torque
- Jacketed design enables heating or cooling circulation
- Stainless-steel frame and bottom drain simplify operation
30 L Jacketed Glass Reactor
The HNZXIB S-30L is a 30 L double-layer glass reactor designed for laboratory synthesis, biopharmaceutical work and new-material preparation. It operates on a 220 V 50/60 Hz supply and uses GG17 high-borosilicate glass for chemical resistance. A 120 W stirring motor drives a PTFE agitator via a universal joint at speeds from 0 to 600 rpm with a maximum of 1300 rpm.
Suited for temperature-controlled reactions under
The jacketed design circulates heating or cooling fluids such as hot oil, water or freezing liquid through the interlayer to maintain constant inner-vessel temperature. A reserved glass thermometer casing allows direct solution monitoring while a bottom drain valve simplifies product recovery. Buyers needing larger capacity or different voltage specifications should consider other models.
Mounted on a SUS304 stainless steel frame
The reactor ships assembled on a sturdy frame; installation mainly involves connecting the circulation hoses to the jacket ports, wiring the 220 V motor and securing the stirring shaft. The 12 mm shaft diameter and PTFE agitator fit the supplied universal joint. Ensure all glass joints are greased and clamped before applying vacuum to prevent leaks.
Highlights
- 30 L capacity handles large-batch synthesis
- GG17 high-borosilicate glass resists chemical attack
- 0–600 rpm stirring with 1300 g·cm torque
- Jacketed design enables heating or cooling circulation
- Stainless-steel frame and bottom drain simplify operation
Specifications
| Type | Glass Reactor |
|---|---|
| Capacity | 30L |
| Voltage | 220V |
Questions about this item
What utilities must be on site for the 30 L jacketed reactor to operate?
You need a 220 V 50/60 Hz mains supply for the 120 W stirring motor, a vacuum pump for the inner layer, and a circulation system — hot oil, water or freezing liquid — to feed the jacket for heating or cooling.
Can the GG17 high-borosilicate vessel and PTFE agitator handle the same solvents and temperatures as my existing glassware?
Yes — GG17 borosilicate glass and PTFE agitator resist the same chemical and thermal range as standard laboratory glassware, so they integrate with existing solvent and temperature workflows.
How do I confirm the stirrer is running at the set speed after assembly?
The LCD display shows real-time stirring speed from 0 to 600 rpm (maximum 1300 rpm), letting you verify the motor is delivering the selected rate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
