HNZXIB
HNZXIB S-2L 2L Jacketed Glass Reactor 220V laboratory supply
A 2 L jacketed glass reactor for vacuum stirring and temperature-controlled reactions at up to 600 rpm with 220 V power
- TypeGlass Reactor
- Capacity2L
- Voltage220V
- 2 L capacity handles mid-scale synthesis batches
- 220 V 50/60 Hz supply suits standard lab mains
- 0–600 rpm adjustable stirring with 1300 rpm peak
- GG17 high-borosilicate glass resists thermal shock and chemicals
- Jacketed design enables heating or cooling via circulated fluid
2L Jacketed Glass Reactor
The HNZXIB S-2L is a 2-litre double-layer glass reactor designed for laboratory synthesis, biopharmaceutical work and new-material preparation. It operates on a 220 V 50/60 Hz supply and uses GG17 high-borosilicate glass for chemical resistance. The floor-standing frame supports the vessel and a 60 W gear motor with a 12 mm stirring shaft.
Sustained stirring and thermal control
The motor delivers 2400 g·cm torque and runs continuously from 0 to 600 rpm with a maximum of 1300 rpm. The jacketed interlayer circulates heat-transfer fluid — hot oil, water or freezing liquid — to maintain constant temperature during long reactions. Vacuum operation in the inner layer allows stirring under negative pressure without thermal drift.
Installation notes and common issues
The unit ships as a floor-type assembly; the large bottle mouth eases cleaning and component access. Users must provide their own circulation pump and temperature-control bath for the jacket. The reserved thermometer casing accepts a standard probe, but the probe itself is not included. PTFE agitator and universal joint require correct alignment to avoid shaft wobble at higher speeds.
Highlights
- 2 L capacity handles mid-scale synthesis batches
- 220 V 50/60 Hz supply suits standard lab mains
- 0–600 rpm adjustable stirring with 1300 rpm peak
- GG17 high-borosilicate glass resists thermal shock and chemicals
- Jacketed design enables heating or cooling via circulated fluid
Specifications
| Type | Glass Reactor |
|---|---|
| Capacity | 2L |
| Voltage | 220V |
Questions about this item
How much power does the 60 W stirring motor draw during continuous all-day operation?
The motor is rated at 60 W and runs on 220 V 50/60 Hz supply; actual draw depends on load and speed setting.
What external temperature-control unit must I already have to use the jacket for heating or cooling?
You need a separate circulator that can pump hot oil, water or freezing liquid through the jacket interlayer.
Will the 12 mm stirring shaft fit the existing PTFE agitators and universal joint in my current setup?
The shaft diameter is 12 mm and the reactor ships with a PTFE agitator and universal joint designed for that size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
