HNZXIB
HNZXIB S-10L 10L 110V Jacketed Glass Reactor laboratory supply
A 10 L jacketed glass reactor with a 120 W stirring motor adjustable up to 600 rpm, GG17 high-borosilicate glass, PTFE agitator.
- TypeGlass Reactor
- Capacity10L
- Voltage110V
- 10 L capacity handles medium-scale synthesis batches
- GG17 high-borosilicate glass resists chemical attack and thermal shock
- Double jacket circulates heating or cooling fluid for temperature control
- 120 W motor delivers 0–600 rpm stirring with 1000 g·cm torque
- SUS304 stainless steel frame provides stable support for the vessel
10 L Jacketed Glass Reactor for Laboratory Synthesis
The HNZXIB S-10L is a 10 L double-layer glass reactor built for synthetic chemistry, biopharmaceutical work and new material preparation. It uses GG17 high-borosilicate glass for chemical resistance and transparency. A stainless-steel SUS304 frame supports the vessel. The unit operates on a 110 V, 50/60 Hz supply.
Vacuum and Temperature Limits of the Jacketed Design
The inner layer handles stirring reactions under vacuum while the jacket circulates heating or cooling fluids such as hot oil, water or freezing liquid. Stirring speed ranges from 0 to 600 rpm with a maximum of 1300 rpm, driven by a 120 W motor delivering 1000 g·cm torque. A PTFE agitator on a 12 mm shaft connects through a universal joint. A reserved thermometer casing allows direct temperature monitoring.
110 Volt Power Requirement Dictates Site
The reactor requires a 110 V, 50/60 Hz electrical connection, so the laboratory must provide that supply. The LCD display simplifies temperature measurement during runs. A bottom drain valve enables easy product release and the large bottle mouth eases cleaning. Gear motor construction uses international copper wire for durability.
Highlights
- 10 L capacity handles medium-scale synthesis batches
- GG17 high-borosilicate glass resists chemical attack and thermal shock
- Double jacket circulates heating or cooling fluid for temperature control
- 120 W motor delivers 0–600 rpm stirring with 1000 g·cm torque
- SUS304 stainless steel frame provides stable support for the vessel
Specifications
| Type | Glass Reactor |
|---|---|
| Capacity | 10L |
| Voltage | 110V |
Questions about this item
Should I choose the 10 L jacketed reactor or a smaller capacity for my batch size?
The 10 L working volume suits batches that fill most of the inner vessel; if your typical run is well below that, a smaller reactor will give better mixing and heat transfer.
What does the 0–600 rpm stirring range mean when the motor is loaded with viscous reaction mass?
The 120 W gear motor delivers up to 1000 g·cm torque, so speed will drop from the no-load 600 rpm as viscosity rises, but it can still turn at up to 1300 rpm under light load.
How does the 110 V 50/60 Hz supply limit the heater or chiller I can connect to the jacket?
The reactor itself only draws 110 V for the stir motor; any external circulator you connect to the jacket must match the same 110 V 50/60 Hz supply or use a separate circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
