HNZXIB
HNZXIB S-100L 100L 220V Glass Reactor laboratory supply
A 100-litre jacketed glass reactor with a 220-volt motor, adjustable stirring up to 1300 rpm, and a stainless-steel frame for heating or cooling reactions under vacuum
- TypeGlass Reactor
- Capacity100L
- Voltage220V
- 100 L capacity enables large-scale batch processing
- GG17 high-borosilicate glass resists chemical attack and thermal shock
- Double-jacket design supports heating or cooling via circulated fluid
- 180 W motor with 0–600 rpm range and 3000 g·cm torque for consistent stirring
- SUS304 stainless steel frame provides rigid, corrosion-resistant support
100L Jacketed Glass Reactor for Laboratories
The HNZXIB S-100L is a 100L double-layer glass reactor designed for synthetic chemical, biopharmaceutical and new material preparation. Its GG17 high-borosilicate glass construction provides strong chemical and physical resistance. The jacketed interlayer circulates thermal fluids to maintain precise high or low reaction temperatures. A 220V electric stir motor with PTFE agitator and universal joint delivers adjustable mixing.
Thermals, Noise and Power Draw
The unit operates on a 220V 50/60Hz supply with a 180W stirring motor rated at 3000 g/cm torque. Stirring speed is adjustable from 0 to 600 rpm with a maximum capability of 1300 rpm. The interlayer accepts heating or cooling media such as hot oil, water or freezing liquid to control reaction temperature efficiently. Heat generated during reaction is removed quickly by cycling water through the jacket.
Stainless Steel Frame and Daily Use
A SUS304 stainless steel frame supports the 100L vessel and motor assembly for stable bench-top operation. The 15 mm diameter stirring shaft connects via a universal joint for reliable torque transfer. A reserved glass thermometer casing allows direct solution temperature monitoring. A bottom drain valve enables easy product release and the large bottle mouth simplifies cleaning between batches. An LCD display provides clear temperature readouts during runs.
Highlights
- 100 L capacity enables large-scale batch processing
- GG17 high-borosilicate glass resists chemical attack and thermal shock
- Double-jacket design supports heating or cooling via circulated fluid
- 180 W motor with 0–600 rpm range and 3000 g·cm torque for consistent stirring
- SUS304 stainless steel frame provides rigid, corrosion-resistant support
Specifications
| Type | Glass Reactor |
|---|---|
| Capacity | 100L |
| Voltage | 220V |
Questions about this item
How do I install the PTFE agitator and universal joint onto the 15 mm stirring shaft, and what step is often missed?
Slide the PTFE agitator onto the 15 mm shaft, secure the universal joint to the 180 W motor, then align and tighten the coupling; the step often missed is verifying concentric rotation at low speed before ramping to 600 rpm.
Which components of the 100 L jacketed reactor will need periodic replacement during long-term use?
The PTFE agitator blades, bottom drain valve seals, and the glass thermometer casing gasket typically require replacement; the GG17 high-borosilicate glass vessel and SUS304 stainless steel frame are designed for extended service.
What is the first operational limit reached when running the stirrer continuously at high speed?
The motor torque rating of 3000 g/cm at 600 rpm is the primary limit; exceeding this load or sustained operation near the 1300 rpm maximum can trigger overload protection on the 180 W gear motor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
