We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 5-litre rotary evaporator kit with glass condenser, water bath, vacuum pump and chiller on a metal frame

HNZXIB

HNZXIB RE501 5L Rotary Evaporator Kit 110V

SKU CH-P2X7-B188H

A 5 L rotary evaporator kit with vacuum pump and chiller, 110 V power, digital speed control to 120 r/min and PTFE sealing for solvent recovery

  • TypeRotary Evaporator
  • Capacity5L
  • Voltage110V
  • 5 L evaporating flask and 3 L receiving flask handle large volumes
  • Stepless speed control up to 120 r/min with digital display for precise operation
  • Double backflow condenser and 1500 W water/oil bath deliver high evaporation efficiency
  • PTFE and fluoro-rubber seals with high borosilicate glassware ensure strong corrosion resistance
  • Manual screw-rod lift with 150 mm travel and CE certification for safe, flexible setup

5 L Rotary Evaporator Kit

The RE501 system combines a five litre rotary evaporator with a desktop water circulating vacuum pump and a matching chiller for laboratory distillation and solvent recovery. It is designed for chemists and technicians who need continuous evaporation of heat sensitive materials under reduced pressure. The kit arrives in wooden case packaging and operates on a 110 volt supply with a US plug.

Vacuum Pump and Chiller Bundle

The included SHZ-D(III)2TAP vacuum pump and DLSB10/10 chiller provide the vacuum depth and coolant circulation required for efficient condensation without separate sourcing. A vacuum degree of 0.098 Mpa and a bath power of 1500 W support high evaporation efficiency and high recovery rates across the operating range. The chiller maintains stable coolant temperature while the dual tap pump allows parallel line connections.

Installation and Common Issues

Assembly uses a screw rod manual lift with 0 to 150 mm travel and stepless speed regulation from 0 to 120 r/min for straightforward flask positioning. High borosilicate glassware and PTFE with fluoro rubber seals resist corrosion but require careful alignment to maintain vacuum integrity. Digital display aids parameter monitoring and the one year warranty covers manufacturing defects.

Highlights

  • 5 L evaporating flask and 3 L receiving flask handle large volumes
  • Stepless speed control up to 120 r/min with digital display for precise operation
  • Double backflow condenser and 1500 W water/oil bath deliver high evaporation efficiency
  • PTFE and fluoro-rubber seals with high borosilicate glassware ensure strong corrosion resistance
  • Manual screw-rod lift with 150 mm travel and CE certification for safe, flexible setup

Specifications

TypeRotary Evaporator
Capacity5L
Voltage110V

Questions about this item

How often will the PTFE and fluoro rubber seals on the RE501 need replacement?

The PTFE and fluoro rubber sealing system is selected for strong corrosion resistance and designed for easy disassembly, so seals can be inspected and swapped during routine maintenance without special tools.

What limits continuous evaporation runs on the 5 L flask with the 1500 W bath?

The 1500 W water/oil bath maintains ±1 °C accuracy up to the 0.098 MPa vacuum rating; sustained runs are limited by the bath’s heat capacity and the 3 L receiving flask volume before it must be emptied.

How much heat and noise does the kit add to a lab running all day at 110 V?

The 40 W motor, 1500 W bath, SHZ-D(III) vacuum pump and DLSB10/10 chiller all operate on 110 V/60 Hz; the chiller removes bath heat while the pump runs quietly, keeping ambient temperature rise low during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.