We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Large glass rotary evaporator with vertical condenser, 10L flask, handwheel lift, water bath, digital display, metal frame

HNZXIB

HNZXIB RE1002 10L Rotary Evaporator 110V Handwheel Lifting

SKU CH-0TXF-AX734

A 10-litre rotary evaporator with handwheel lifting, 110 V power and 180 W motor speed up to 120 r/min for solvent separation and essential-oil concentration

  • TypeRotary Evaporator
  • Capacity10L
  • Voltage110V
  • 10 L capacity handles large-volume distillation
  • 0-120 r/min rotation with digital display for precise control
  • PTFE sealing system maintains 0.098 Mpa vacuum for high recovery
  • 3 kW water bath heats from ambient to 99 °C with ±1 °C stability
  • Vertical condenser with 0.57 m² cooling surface supports efficient solvent condensation

10 L Rotary Evaporator with Handwheel Lifting

The HNZXIB RE1002 is a 10-litre rotary evaporator designed for laboratory solvent separation, concentration and recycling. It operates on a 110 V, 60 Hz supply and uses a handwheel mechanism to raise or lower the water bath. A PTFE sealing system maintains a vacuum degree of 0.098 MPa during operation.

Suited for essential-oil extraction

This unit fits workflows that need a 10 L evaporation flask and a 5 L receiving flask with vertical condenser cooling of 0.57 m². Digital speed control runs from 0 to 120 r/min and the water bath holds temperatures from ambient to 99 °C with ±1 °C stability. Buyers who require an integrated vacuum pump, a recirculating chiller or an explosion-proof build must source those separately.

110 V, 60 Hz power requirement decides compatibility

The evaporator draws 180 W for rotation and 3000 W for the water bath heater, both rated for 110 V, 60 Hz mains; a 220 V option exists but is not the default. No plug is fitted, so the installer must provide a suitable connector. Confirm that the laboratory supply matches these voltage and frequency ratings before purchase.

Highlights

  • 10 L capacity handles large-volume distillation
  • 0-120 r/min rotation with digital display for precise control
  • PTFE sealing system maintains 0.098 Mpa vacuum for high recovery
  • 3 kW water bath heats from ambient to 99 °C with ±1 °C stability
  • Vertical condenser with 0.57 m² cooling surface supports efficient solvent condensation

Specifications

TypeRotary Evaporator
Capacity10L
Voltage110V

Questions about this item

How do I verify the RE-1002 is evaporating at the rated 3 L/H after installation?

Monitor the digital display during water-based runs; it should report an evaporation rate approaching 3 L/H when the 10 L flask rotates at up to 120 r/min under 0.098M pa vacuum with the condenser cooled.

Which items arrive in the wooden case and what must I source separately?

The case contains the RE-1002 main unit with 10 L evaporating flask, 5 L receiving flask, vertical condenser, PTFE sealing system and handwheel-lift water bath rated at 3000 W. A plug, circulating water vacuum pump and refrigerator circulator are not included.

Should I choose the standard RT~99 °C bath or the optional 250 °C range for my solvent work?

Select the RT~99 °C configuration for most essential-oil and solvent separations; choose the 250 °C option only if your process requires bath temperatures above 99 °C.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.