HNZXIB
HNZXIB RE-501 5L Rotary Evaporator with -20°C Chiller 110V
5-litre rotary evaporator with a -20 °C circulating chiller, 0-120 r/min digital speed control and 1 500 W water-oil bath on 110 V power
- TypeRotary Evaporator
- Capacity5L
- Voltage110V
- 5L capacity handles large-volume distillation
- Digital 0-120 r/min speed control optimises evaporation
- 20 °C chiller enables low-temperature solvent recovery
- PTFE and fluoro-rubber seals maintain 0.098 Mpa vacuum
- CE and ISO certified for laboratory safety
5L Rotary Evaporator for Laboratory Distillation
The HNZXIB RE-501 is a 5L rotary evaporator designed for laboratory distillation and solvent recovery. It combines a rotating flask system with a circulating chiller capable of reaching -20°C. The unit operates on 110V power with a US plug and includes high borosilicate glassware.
Manual Lifting and Vacuum Limits
Lifting is handled by a screw rod with 150mm of travel instead of motorised actuation. The system achieves a vacuum degree of 0.098Mpa and uses PTFE with fluoro rubber sealing. A digital display shows rotation speed from 0 to 120 r/min driven by a 40W motor.
5L Evaporating Flask Capacity
The evaporating flask holds 5L while the receiving flask holds 3L, setting the maximum batch volume per run. The water and oil bath delivers 1500W with ±1°C temperature accuracy. Buyers needing larger single-batch capacity should consider a different system.
Highlights
- 5L capacity handles large-volume distillation
- Digital 0-120 r/min speed control optimises evaporation
- 20 °C chiller enables low-temperature solvent recovery
- PTFE and fluoro-rubber seals maintain 0.098 Mpa vacuum
- CE and ISO certified for laboratory safety
Specifications
| Type | Rotary Evaporator |
|---|---|
| Capacity | 5L |
| Voltage | 110V |
Questions about this item
Should I choose the 5L evaporating flask or the 3L receiving flask for my batch size?
The evaporating flask holds 5L and the receiving flask holds 3L, so plan batch volumes around the 3L collection capacity.
What does the 1 L/H evaporation rate mean when the unit is running?
Under typical vacuum of 0.098Mpa and bath heating up to 1500W, the system can evaporate roughly one litre of solvent per hour.
What vacuum level does the PTFE and fluoro rubber sealing achieve in practice?
The sealing is rated for a vacuum degree of 0.098Mpa, which the condenser and glassware are designed to maintain during operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
