HNZXIB
HNZXIB RE-5002 50L Rotary Evaporator 110V Handwheel Lifting
A 50 L rotary evaporator with 0-90 r/min digital speed control, 1.5 m² condenser surface and 7000 W water-bath heating for solvent separation and essential-oil concentration
- TypeRotary Evaporator
- Capacity50L
- Motor TypeDC Brushed
- Voltage110V
- Color/FinishSilver
- Labor1 Year
- 50 L capacity handles large-volume distillation
- 0–90 r/min digital speed control for precise evaporation
- 7 000 W water-bath heating reaches 99 °C quickly
- PTFE sealing system maintains 0.098 Mpa vacuum
- Vertical double condenser with 1.5 m² cooling surface
50L Rotary Evaporator for Solvent Separation
The HNZXIB RE-5002 is a 50L rotary evaporator designed for solvent separation and essential oil concentration. It operates on 110V power with a DC brushed motor and features a vertical double condenser with 1.5m² cooling surface. A digital display shows the rotating speed range of 0-90 r/min for process monitoring.
Suited for High-Volume Lab and Molecular Cooking
This unit suits laboratories and molecular cooking setups needing high evaporating efficiency and a 50L flask capacity. The PTFE sealing system supports a vacuum degree of 0.098Mpa. Buyers requiring a plug-and-play connection should note the unit ships without a plug and requires an air switch installation.
Sustained Operation with Water Bath Heating
Under continuous load the 7000W water bath maintains a static temperature range of RT~99°C with ±1°C fluctuation. The motor delivers 250W power to sustain rotation while the condenser handles vapour recovery at an evaporation rate above 9 L/H for water. The 110V supply can draw up to 64A during extended runs.
Highlights
- 50 L capacity handles large-volume distillation
- 0–90 r/min digital speed control for precise evaporation
- 7 000 W water-bath heating reaches 99 °C quickly
- PTFE sealing system maintains 0.098 Mpa vacuum
- Vertical double condenser with 1.5 m² cooling surface
Specifications
| Type | Rotary Evaporator |
|---|---|
| Capacity | 50L |
| Motor Type | DC Brushed |
| Voltage | 110V |
| Color/Finish | Silver |
| Labor | 1 Year |
Questions about this item
What air-switch rating must I already have to power the 7000 W water bath at 110 V?
The unit draws up to 64 A at 110 V, so your site needs an air switch rated for at least that current before installation.
Can I keep my existing 50 L glassware when switching to this RE-5002?
Yes, the evaporating and receiving flasks are both 50 L, matching common large-scale glassware sizes.
How do I confirm the vacuum seal is holding after assembly?
The PTFE sealing system should reach 0.098 Mpa vacuum; watch the digital display for a stable reading at that level.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
