HNZXIB
HNZXIB DFY-10/40 10 L -40 °C to 98 °C laboratory supply
A 10 L laboratory bath circulates fluid from -40 °C to 98 °C with ±0.1 °C accuracy and a 20 L/min pump
- TypeWater/Oil Bath
- Temperature Range-40°C~98°C
- Speed20L/min
- Capacity10L
- Voltage110V
- Precise ±0.1 °C stability for reproducible results
- Wide -40 °C to 98 °C range covers diverse protocols
- 20 L/min circulation ensures uniform bath temperature
- 10 L stainless tank handles standard sample volumes
- Magnetic stirring in two zones improves thermal uniformity
Laboratory circulator for low-temperature research
The HNZXIB DFY-10/40 is a 10L water and oil bath that circulates fluid at 20L/min across a -40°C to 98°C range. It suits scientific, biological, medical and chemical departments needing precise low-temperature conditions without dry ice or liquid nitrogen. Magnetic stirring in two sections improves tank uniformity for viscosity measurements and reaction work.
Check voltage and aperture fit before ordering
The unit requires a 110V 60Hz supply and an opening diameter of 285mm for vessel placement. Verify that your bench power matches the voltage and that your glassware or fixtures clear the aperture. The wooden-case packaging adds transit protection but does not alter the electrical or mechanical interface you must provide.
Sustained operation at ±0.1°C stability
Under continuous load the refrigeration system delivers between 748W and 2548W of capacity to hold the set point. The circulating pump maintains 20L/min flow while the dual-section magnetic stirrer prevents thermal gradients during long runs. Temperature accuracy remains within ±0.1°C throughout extended cycling between the extremes of the range.
Highlights
- Precise ±0.1 °C stability for reproducible results
- Wide -40 °C to 98 °C range covers diverse protocols
- 20 L/min circulation ensures uniform bath temperature
- 10 L stainless tank handles standard sample volumes
- Magnetic stirring in two zones improves thermal uniformity
Specifications
| Type | Water/Oil Bath |
|---|---|
| Temperature Range | -40°C~98°C |
| Speed | 20L/min |
| Capacity | 10L |
| Voltage | 110V |
Questions about this item
Does the unit come with the circulating pump and magnetic stirrer already installed, or do I need to buy them separately?
The circulator pump rated at 20 L/min and the two-section magnetic stirrer are built into the bath, so no extra pump or stirrer purchase is required.
Should I choose the 10 L model or a different capacity for a -40 °C to 98 °C range?
This DFY-10/40 model provides the full -40 °C to 98 °C range with a 10 L stainless-steel tank; other capacities would carry a different model number.
Will the bath hold ±0.1 °C accuracy when I connect it to an external reactor through the 285 mm opening?
The ±0.1 °C specification is measured at zero load; adding an external loop through the f285 mm aperture will introduce thermal load that typically widens the actual tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
