HNZXIB
HNZXIB 500ml High Pressure Reactor 22MPa CJF series 350°C
A 500 ml stainless-steel autoclave reaches 350 °C and 22 MPa with magnetic-drive stirring for leak-free reactions
- TypePressure Reactor
- MaterialSteel
- Capacity500ml
- Voltage220V
- 500 ml capacity handles larger reaction batches
- 350 °C maximum temperature covers high-heat synthesis
- 22 MPa pressure rating contains demanding processes
- Magnetic coupling eliminates shaft-seal leakage
- ±1 °C PID control keeps temperature stable
500 ml High Pressure Reactor
The CJF series vessel handles 500 ml of reaction volume and is built from stainless steel for corrosion resistance. It operates at up to 22 MPa and 350 °C with a magnetic coupling that eliminates dynamic seal leakage. A 0.6 kW electric heater and PID controller maintain temperature within ±1 °C.
Suits sealed high pressure synthesis
This reactor suits laboratories running flammable, toxic or precious media where zero leakage is required. The static magnetic seal and 120 N·cm stirring torque support gas liquid, liquid liquid or three phase reactions. It is not for users needing larger volumes, higher pressure ratings or alternative heating methods such as thermal oil or steam.
500 ml capacity with 22 MPa headroom
The 500 ml chamber comfortably handles small scale catalytic, polymerisation or fluorination work at full rated pressure and temperature. Headroom ends at the 22 MPa and 350 °C limits so processes exceeding those parameters need a different vessel.
Highlights
- 500 ml capacity handles larger reaction batches
- 350 °C maximum temperature covers high-heat synthesis
- 22 MPa pressure rating contains demanding processes
- Magnetic coupling eliminates shaft-seal leakage
- ±1 °C PID control keeps temperature stable
Specifications
| Type | Pressure Reactor |
|---|---|
| Material | Steel |
| Capacity | 500ml |
| Voltage | 220V |
Questions about this item
What power supply must I have available to run the 220V reactor?
The unit requires a 220V mains connection and draws 0.6 kW of heating power, so a circuit rated for at least 3 A is needed.
Can the magnetic-drive stirrer handle the same 22 MPa pressure as the vessel body?
Yes, the static magnetic coupling is designed for the full 22 MPa (220 bar) rating, eliminating dynamic-seal leaks at pressure.
How do I verify the temperature controller is holding the set-point within ±1 °C?
The PID controller shows real-time temperature; watch the display settle at the target value and remain stable within one degree.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
