HNZXIB
HNZXIB 300ml Hydrothermal Synthesis Reactor 240°C PTFE Lining KH Series
A 300 ml hydrothermal synthesis reactor with PTFE lining and non-magnetic stainless steel body rated for 240 °C maximum temperature
- TypePressure Reactor
- Temperature RangeRT~240°C
- MaterialSteel
- Capacity300ml
- 300 ml capacity handles larger batch synthesis
- PTFE lining resists both acid and alkali attack
- Non-magnetic 0Cr18Ni9Ti steel prevents sample contamination
- Operates safely up to 240 °C with 220 °C security limit
- Heating and cooling rates below 5 °C/min protect vessel integrity
300 ml Hydrothermal Reactor for Lab Research
This 300 ml hydrothermal synthesis reactor is built for laboratory research and small-scale synthesis. It suits universities, research units and engineers working on new materials, energy or environmental projects. The vessel handles acid or alkali digestion of samples such as heavy metals, pesticide residues, food, water, mud, rare earth products and organic matter.
Capacity and Temperature Headroom
The inner chamber holds 300 ml with a recommended maximum fill of 80 %. It operates from room temperature up to 240 °C, with a security limit of 220 °C. Heating and cooling rates must stay below 5 °C per minute, and the safety pressure rating is 3 Mpa.
Non-Magnetic Steel Build with PTFE Liner
The body uses non-magnetic 0Cr18Ni9Ti stainless steel for structural strength. A Teflon inner lining adds double protection against acid and alkali attack. The design is described as easy to operate, and the unit ships in a wooden case.
Highlights
- 300 ml capacity handles larger batch synthesis
- PTFE lining resists both acid and alkali attack
- Non-magnetic 0Cr18Ni9Ti steel prevents sample contamination
- Operates safely up to 240 °C with 220 °C security limit
- Heating and cooling rates below 5 °C/min protect vessel integrity
Specifications
| Type | Pressure Reactor |
|---|---|
| Temperature Range | RT~240°C |
| Material | Steel |
| Capacity | 300ml |
Questions about this item
Will the 300 ml PTFE lining work inside my existing oven that only reaches 220 °C?
Yes, the security temperature is 220 °C, so the reactor stays within its safe limit at that setting.
How can I confirm the autoclave is sealed and heating correctly after I load it?
Monitor the temperature rise; it must stay below 5 °C per minute and the vessel should hold pressure up to 3 Mpa without leaking.
Does the wooden case include the Teflon liner or do I order it separately?
The KH-300 ships complete with the PTFE inner lining inside the non-magnetic stainless steel body; no extra parts are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
