HNZXIB
HNZXIB 25ml Hydrothermal Synthesis Reactor 240°C PTFE KH series
A 25 ml pressure reactor with a PTFE lining and non-magnetic stainless steel body, rated to 240 °C for hydrothermal synthesis and sample digestion
- TypePressure Reactor
- Temperature RangeRT~240°C
- MaterialSteel
- Capacity25ml
- 25 ml capacity enables small-scale hydrothermal synthesis
- PTFE inner lining resists acids and alkalis for sample integrity
- Non-magnetic 0Cr18Ni9Ti stainless steel shell adds structural safety
- Operates up to 240 °C with 220 °C security limit
- Heating and cooling rates below 5 °C/min protect vessel integrity
Capacity and Purpose
The HNZXIB KH-25 is a 25 ml hydrothermal synthesis reactor built for laboratory digestion and small-scale synthesis. It serves researchers, teaching labs and quality-control units that need a sealed vessel for acid or alkali treatment of samples such as heavy metals, pesticides or organic matter.
Build and Daily Use
The reactor body uses non-magnetic 0Cr18Ni9Ti stainless steel with a PTFE inner liner that resists both acids and alkalis. A wooden case protects the unit during transit, while the screw-top closure and double-layer protection simplify loading, sealing and cleaning between runs.
Temperature and Pressure Limits
Operation is rated from room temperature up to 240 °C with a safety ceiling of 220 °C, and heating or cooling rates must stay below 5 °C per minute. The vessel withstands 3 MPa safety pressure, and filling must not exceed 80 % of the 25 ml capacity to avoid over-pressurisation.
Highlights
- 25 ml capacity enables small-scale hydrothermal synthesis
- PTFE inner lining resists acids and alkalis for sample integrity
- Non-magnetic 0Cr18Ni9Ti stainless steel shell adds structural safety
- Operates up to 240 °C with 220 °C security limit
- Heating and cooling rates below 5 °C/min protect vessel integrity
Specifications
| Type | Pressure Reactor |
|---|---|
| Temperature Range | RT~240°C |
| Material | Steel |
| Capacity | 25ml |
Questions about this item
What is the maximum operating temperature and safety temperature limit for this reactor?
The reactor operates up to 240 °C with a safety temperature limit of 220 °C to prevent overheating during experiments.
What are the physical capacity and fill limits for the PTFE liner?
The vessel holds 25 ml total volume and should not be filled beyond 80 % to allow safe pressure expansion.
How should the reactor be heated and cooled to avoid damage?
Heat and cool at rates below 5 °C per minute and only open the lid after the vessel has returned to room temperature naturally.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
