HNZXIB
HNZXIB 150ml Hydrothermal Synthesis Reactor 240°C KH series
A 150 ml hydrothermal synthesis reactor with a PTFE lining and non-magnetic stainless steel body, rated for 240 °C maximum temperature and 220 °C safety temperature
- TypeGlass Reactor
- Temperature RangeRT~240°C
- Capacity150ml
- 150 ml capacity handles larger sample volumes
- PTFE inner lining resists acids and alkalis
- Non-magnetic 0Cr18Ni9Ti stainless steel body prevents interference
- Operates up to 240 °C with 220 °C safety limit
- Heating and cooling rates below 5 °C/min protect vessel integrity
150ml Hydrothermal Synthesis Reactor
The HNZXIB KH-series reactor provides a 150ml PTFE-lined vessel for hydrothermal synthesis up to 240°C. It serves university teaching labs and research units that need a small-scale pressure vessel for digesting heavy metals, pesticide residues, rare earth products and other insoluble materials in acid or alkali environments.
Setup checks before ordering
Confirm that your oven or furnace can hold the heating and cooling rate below 5°C per minute and that the maximum operating temperature of 240°C is not exceeded. Verify that the intended fill volume stays at or below 80 percent of the 150ml capacity and that the safety pressure limit of 3 Mpa is compatible with your facility's pressure-rated equipment.
Behaviour under sustained load
The non-magnetic 0Cr18Ni9Ti stainless steel shell and Teflon inner lining maintain acid and alkali resistance during prolonged high-temperature runs. Heating and cooling rates are kept under 5°C per minute to protect the liner, and the vessel must cool naturally to room temperature before opening after each cycle.
Highlights
- 150 ml capacity handles larger sample volumes
- PTFE inner lining resists acids and alkalis
- Non-magnetic 0Cr18Ni9Ti stainless steel body prevents interference
- Operates up to 240 °C with 220 °C safety limit
- Heating and cooling rates below 5 °C/min protect vessel integrity
Specifications
| Type | Glass Reactor |
|---|---|
| Temperature Range | RT~240°C |
| Capacity | 150ml |
Questions about this item
Does the reactor arrive with the PTFE liner and stainless-steel vessel assembled, or must any part be purchased separately?
The autoclave is shipped as a complete KH-150 unit with the non-magnetic 0Cr18Ni9Ti stainless-steel body and the Teflon inner liner already fitted inside the wooden case; no additional components are required for standard hydrothermal runs.
Is the 150 ml capacity the only volume available for this KH series model?
The listing specifies the KH-150 variant with a 150 ml inner volume; the supplier notes that capacity volume is customizable, so other sizes can be requested directly.
What does the 240 °C maximum temperature mean for an actual synthesis cycle?
You may heat the sealed vessel to 240 °C provided the ramp stays below 5 °C per minute, the fill level does not exceed 80 % of the 150 ml liner, and the safety pressure limit of 3 MPa is not surpassed; cooling must also stay under 5 °C per minute before opening.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
