HNZXIB
HNZXIB 10L Essential Oil Extractor 110V Stainless Steel
Stainless-steam steam distillation system with a 10 L tank, 3 kW oil-bath heating to 100 °C and glass oil-water separator for high-purity essential oils
- Voltage110V
- 10 L capacity handles batch runs
- 3 kW heating reaches 100 °C quickly
- Indirect heat-transfer oil keeps process clean and safe
- Borosilicate glass condenser and separator deliver high-purity oil
- SUS304 stainless steel construction resists corrosion
10-litre steam-distillation extractor
This 10-litre stainless-steel extractor uses steam distillation to process plant branches, flowers, grasses and animal materials. It runs on 110 V mains power and is built from SUS304 and 0CR18NI9TI grades for corrosion resistance. The integrated automatic control system lets a single operator run a full extraction cycle.
Bench-top footprint with built-in filtration
The unit occupies roughly one cubic metre of bench space and includes a two-stage filtration device plus a glass liquid-level gauge. An open-top, multi-layer distillation basket simplifies loading and cleaning, while the boride-glass oil-water separator and condenser enable direct collection without extra glassware. Heat-transfer oil circulation reaches 100 °C at normal pressure, so no high-pressure vessel certification is required.
3 kW indirect heating with optional vacuum assist
Electric heating power is rated at 3 kW, warming the heat-transfer oil that surrounds the 0.21 cubic metre tank jacket. Condensing area totals 0.28 cubic metre using a drip-irrigation or short-distance reflux condenser made from boride glass and SUS304. The interlayer operates at 0.3 to 0.4 MPa and an optional vacuum of -0.08 MPa can be applied for temperature-sensitive botanicals.
Highlights
- 10 L capacity handles batch runs
- 3 kW heating reaches 100 °C quickly
- Indirect heat-transfer oil keeps process clean and safe
- Borosilicate glass condenser and separator deliver high-purity oil
- SUS304 stainless steel construction resists corrosion
Specifications
| Voltage | 110V |
|---|
Questions about this item
How much heat-transfer oil can the jacket hold before it limits a long run?
The extraction tank has a heating area of 0.21 cubic metre, which determines the oil volume the jacket can contain.
What temperature does the condenser reach during continuous operation?
The condenser provides 0.28 cubic metre of condensing area and uses boride glass with SUS304 stainless steel for heat dissipation.
What utilities must be on site for the extractor to run?
A 110 V supply capable of 3 kW, a water source for the drip-irrigation condenser, and a compressed-air line for the 0.3-0.4 Mpa interlayer pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
