HNZXIB
HNZXIB 1000ml Hydrothermal Synthesis Reactor 240°C KH series
A 1000ml hydrothermal synthesis reactor with PTFE lining and non-magnetic stainless steel body for laboratory use up to 240°C
- TypePressure Reactor
- Temperature RangeRT~240°C
- MaterialSteel
- Capacity1L
- 1000 ml capacity handles large batch synthesis
- PTFE lining resists acid and alkali corrosion
- Non-magnetic 0Cr18Ni9Ti steel avoids sample interference
- Operates up to 240 °C for demanding reactions
- Safe heating and cooling rate below 5 °C/min
1000ml Hydrothermal Reactor
The HNZXIB KH-series reactor provides a 1000ml PTFE-lined vessel for hydrothermal synthesis up to 240°C. It serves university teaching labs and research units that need a small-scale pressure vessel for digesting insoluble materials such as heavy metals, pesticide residues, or rare-earth samples.
Temperature and Pressure Limits
Operation must stay at or below 240°C with a security ceiling of 220°C. Heating and cooling rates are capped at 5°C per minute and the safety pressure rating is 3 Mpa. Filling volume must not exceed 80% of the 1000ml capacity, and the lid should only be opened after natural cooling to room temperature.
Non-Magnetic Steel and PTFE Lining
The body uses 0Cr18Ni9Ti non-magnetic stainless steel with a Teflon inner liner that resists both acid and alkali attack. This double-protection construction withstands aggressive digestion chemistries while remaining easy to operate. The reactor ships in a wooden case for transit protection.
Highlights
- 1000 ml capacity handles large batch synthesis
- PTFE lining resists acid and alkali corrosion
- Non-magnetic 0Cr18Ni9Ti steel avoids sample interference
- Operates up to 240 °C for demanding reactions
- Safe heating and cooling rate below 5 °C/min
Specifications
| Type | Pressure Reactor |
|---|---|
| Temperature Range | RT~240°C |
| Material | Steel |
| Capacity | 1L |
Questions about this item
Which capacity version of the KH series hydrothermal reactor should I choose for 1 L batches?
The KH-1000 model provides a 1000 ml internal volume, so it matches a 1 L batch requirement directly.
What does the 240 °C maximum temperature mean for daily operation?
The vessel is rated to 240 °C, but the safety limit is 220 °C; heating and cooling rates must stay below 5 °C/min to avoid over-pressure.
How does the PTFE lining and stainless steel body affect chemical compatibility?
The 0Cr18Ni9Ti non-magnetic stainless steel shell with Teflon inner lining resists both acid and alkali environments during sealed high-pressure digestion.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
