We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.0 to SATA/IDE adapter with power supply and cables

Hitoor

Hitoor USB 3.0 to SATA/IDE Adapter 2.5 3.5 5.25 hard drive adapter

SKU CH-5E21-CV2BD

Connects 2.5", 3.5" and 5.25" SATA or IDE drives via USB 3.0 at 5 Gbps with UASP support, includes 12 V power supply and 2.62 ft cable for data recovery or drive access

  • ColorBlack
  • Changer TypeUSB 3.0 to SATA/IDE Adapter
  • Connector A1 x USB 3.0
  • Connector BSATA IDE
  • FeaturesUSB 3.0 5Gbps Super Speed, supports UASP, Hard drive recover
  • Package Quantity1
  • Connect 2.5 and 3.5 SATA or IDE drives via USB 3.0
  • Retrieve data from legacy drives with up to 6 TB capacity
  • Transfer files at 5 Gbps with UASP acceleration
  • Power larger drives using the included 12 V 2 A supply
  • Works with Windows, Mac OS and Linux without drivers

USB 3.0 to SATA and IDE adapter

This adapter connects 2.5 and 3.5 inch SATA or IDE hard drives and SSDs to a USB 3.0 port. It also supports 5.25 inch optical drives. The device is intended for data recovery, drive cloning or quick access to archived storage without installing the drive internally. It works with Windows, macOS and Linux systems.

Thermals noise and power

The unit draws power from an included 12V 2A supply for 3.5 inch and IDE drives. A power switch lets you turn the connected drive off without unplugging the cable. No active cooling is present so the adapter runs silently during normal operation. Power consumption scales with the attached drive rather than the adapter itself.

Included accessories and software

A 2.62ft USB 3.0 male-to-male cable links the adapter to the host computer. A 4-pin Molex cable provides the legacy power connection required by IDE drives. The package also contains a simple user manual. No driver installation or bundled software is needed for basic operation.

Highlights

  • Connect 2.5 and 3.5 SATA or IDE drives via USB 3.0
  • Retrieve data from legacy drives with up to 6 TB capacity
  • Transfer files at 5 Gbps with UASP acceleration
  • Power larger drives using the included 12 V 2 A supply
  • Works with Windows, Mac OS and Linux without drivers

Specifications

ColorBlack
Changer TypeUSB 3.0 to SATA/IDE Adapter
Connector A1 x USB 3.0
Connector BSATA IDE
FeaturesUSB 3.0 5Gbps Super Speed, supports UASP, Hard drive recovery converter supports a hard drive capacity of Up to 6TB capacity
Package Quantity1
Package Contents1 x USB 3.0 to SATA /IDE converter,1 x USB 3.0 male to male cable 2.62ft,1 x Simple users manual,1 x 12V/2A power supply, 1 x 4Pin Molex cable

Questions about this item

How do I connect a 3.5" IDE drive and avoid the step people often miss?

Set the drive jumper to slave before powering on, attach the 4‑pin Molex cable from the included 12V/2A supply, then plug the USB 3.0 cable into the host.

What maintenance will the 12V/2A power supply and Molex cable need over time?

Check the brick and cables for cracked insulation or loose pins; replace the supply if voltage drops under load or the fan (if present) becomes noisy.

What limit appears first during a long 6TB transfer over USB 3.0?

The USB 3.0 5Gbps link caps sustained throughput, so the adapter hits that bandwidth ceiling before the drive’s own speed limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.