We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Hitoor

Hitoor Gigabit RJ45 Ethernet Splitter 1 to 2 with USB Power Cable

SKU CH-9BJC-CSE08

Connects two devices to a single Ethernet line with gigabit speed and an 80 cm USB power cable

  • Switch TypeEthernet Splitter
  • FeaturesEthernet Splitter 1 To 2 Ports: Introducing our high-perform
  • Package Contents1 x Gigabit RJ45 Ethernet Splitter
  • Connect two devices on one cable with USB power
  • Gigabit throughput up to 1000 Mbps on each port
  • Works with Cat5 through Cat8 Ethernet cables
  • Gold-plated contacts and solid PCB for reliable signal
  • Compact ABS shell with 80 cm USB power lead

One input, two active ports

This Gigabit RJ45 Ethernet Splitter turns a single network cable into two simultaneous connections for devices such as computers, TVs or set-top boxes. It is aimed at installers who cannot run additional cabling but need both endpoints online at the same time. A USB power cable is included and must be connected for the splitter to operate.

Plug in, power up, connect

Installation is straightforward: link the incoming Ethernet cable to the single input jack, attach the two outgoing cables to the dual female ports, then plug the supplied 80 cm USB cable into any standard 5 V USB source. The unit will not function without that power connection, which is the most common reason a new setup appears dead on arrival.

Check your cabling and power source

Before ordering, verify that the existing cable run uses Cat5e, Cat6, Cat7 or Cat8 wiring so the 1000 Mbps rate can be sustained on each leg. Ensure a USB power outlet — charger, hub or powered port — is reachable within the 80 cm lead length, because the splitter cannot operate on data signals alone.

Highlights

  • Connect two devices on one cable with USB power
  • Gigabit throughput up to 1000 Mbps on each port
  • Works with Cat5 through Cat8 Ethernet cables
  • Gold-plated contacts and solid PCB for reliable signal
  • Compact ABS shell with 80 cm USB power lead

Specifications

Switch TypeEthernet Splitter
FeaturesEthernet Splitter 1 To 2 Ports: Introducing our high-performance Gigabit Ethernet RJ45 Splitter with 1 input and 2 output ports,it primarily used to address connection issues brought on by inadequate cabling, supports two computers sharing a single Ethernet line concurrently with the use of a USB power supply cable.
1000Mbps Transfer Speed: RJ45 Splitter Adapter 1 to 2 ways dual female port ethernet cable, the speed of two cable group (1 and 2) can reach 1000Mbps. And the signal transmission of two cable groups will not interfere.
Durable and Good Material: Internet Cable Splitter bu
Package Contents1 x Gigabit RJ45 Ethernet Splitter

Questions about this item

How can I confirm the splitter is working after I connect it?

Connect the USB power cable to a 5 V supply, plug the incoming cable into the single RJ45 port and attach two devices to the dual female ports; both should show an active 1000 Mbps link simultaneously.

What comes in the box and what must I provide separately?

The package includes one Gigabit RJ45 Ethernet Splitter, one 80 cm / 2.6 ft USB charging cable and an instruction manual; you must supply a standard 5 V USB power source and the Cat5/5e/6/7/8 network cables.

Which version should I choose for two devices sharing one line at full speed?

This single model provides 1 input and 2 output ports with concurrent 1000 Mbps operation on both ports when powered via the included USB cable, so no other version or capacity is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.