We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two clear 10mm 2-pin LED strip extension cables, each 1.82m long, with transparent connectors on both ends

HitLights 2 Pin 10mm LED Strip Extension Cable 2 Pack 6FT 1.82M

SKU CH-TD2H-30MNH

Two 6 ft extension cables with 2-pin 10 mm connectors for SMD 2835 and COB single-colour LED strips

  • Color2Pin 10mm { 2 X 6FT)
  • Standards/CertificationsNot Applicable
  • Extends 10 mm strips by 1.82 m
  • Works with SMD 2835 and COB single-colour strips
  • Horizontal line marks negative pole for tool-free fit
  • Transparent connectors cut and re-used without affecting strip
  • PVP jacket gives flame retardancy, oxidation resistance and flexibility

10 mm 2-pin extension for single-colour strips

This pair of 1.82 m cables links 10 mm SMD 2835 or COB LED strips to power or controllers. The 2-pin layout carries a single colour channel, so it suits white or fixed-colour runs rather than RGB installations. Transparent connectors on both ends keep the light output uninterrupted while joining sections.

Fits 10 mm strips only — not 8 mm or SMD 5050

Each cable has a horizontal line marking the negative pole; align it with the strip’s minus symbol for correct polarity. The PVP jacket resists flame, oxidation and repeated bending, and the connectors can be cut off and reused if the layout changes. No tools are required beyond matching the marked wires.

Replaces short fixed leads or solder joints

Builders who need longer runs between strip segments and the driver gain 1.82 m per cable without voltage drop from thin wire. The jump is worth it when factory leads are too short for under-cabinet, stair or display gaps. Buyers needing RGB control or 8 mm strip compatibility cannot use this kit.

Highlights

  • Extends 10 mm strips by 1.82 m
  • Works with SMD 2835 and COB single-colour strips
  • Horizontal line marks negative pole for tool-free fit
  • Transparent connectors cut and re-used without affecting strip
  • PVP jacket gives flame retardancy, oxidation resistance and flexibility

Specifications

Color2Pin 10mm { 2 X 6FT)
Standards/CertificationsNot Applicable

Questions about this item

How long can the cable run before voltage drop affects the LED strip?

Each cable is 1.82 m long; total run length depends on the power supply and LED strip current draw, which are not included.

Does the cable or its connectors generate noticeable heat during continuous operation?

The extension uses low-resistance connectors and a PVP jacket rated for flame retardancy; it carries only the strip's operating current, so heat remains minimal.

What must I already have to use these 2-pin 10 mm extension cables?

You need a compatible 10 mm SMD 2835 or COB single-colour LED strip and a matching 12 V or 24 V power supply; the cables do not work with 8 mm or SMD 5050 strips.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.