Hitachi, Ltd.
Hitachi, Ltd. X308 Projector Lamp 220W 2000 Hrs
220 W replacement projector lamp module with Ushio UHB bulb and housing, rated for 2,000 hours of use
- TypeProjector Lamp
- Wattage220W
- Lamp Life2,000 Hrs.
- 220 W UHB lamp delivers bright, consistent images
- 2,000-hour rated life reduces replacement frequency
- Pre-assembled bulb and housing enables quick installation
- Manufactured to ISO 9001 quality standards for reliability
- Compatible with Hitachi X308 projectors (model DT00841)
Hitachi X308 Replacement Lamp
The Hitachi X308 is a new 220W projector lamp module that ships as a fully assembled bulb and housing. It is designed for owners of compatible Hitachi projectors who need a direct replacement without separate component assembly. The lamp uses a UHB bulb rated for 2,000 hours of operation. It is not suited for users whose projector requires a different wattage or lamp form factor.
Thermal noise and power draw
The lamp consumes 220W during normal projection and is engineered to meet ISO 9001 quality checks for ignition, voltage and run-time stability. Operating temperature and acoustic output depend on the host projector’s cooling design rather than the lamp module itself. No independent noise or thermal figures are provided for the lamp in isolation.
Bundled housing advantage
Because the bulb comes pre-installed in its housing, installation is limited to swapping the complete module rather than handling a bare bulb. The supplier notes that each unit undergoes beam performance and appearance inspections before shipping. No additional software, cables or mounting hardware are mentioned in the specifications.
Highlights
- 220 W UHB lamp delivers bright, consistent images
- 2,000-hour rated life reduces replacement frequency
- Pre-assembled bulb and housing enables quick installation
- Manufactured to ISO 9001 quality standards for reliability
- Compatible with Hitachi X308 projectors (model DT00841)
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 220W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How do I install the DT00841 lamp module, and which step causes the most errors?
Power off and unplug the projector, wait for it to cool, remove the old module by its handle, insert the new DT00841 module until it clicks, then reset the lamp-hour counter in the menu — skipping the counter reset is the step most people forget.
What maintenance or replacement will the Ushio UHB 220W bulb need later?
The 220W UHB bulb is rated for 2,000 hours of use; after that the lamp module must be replaced because the bulb cannot be serviced or re-lamped separately.
What limit appears first during sustained use of this 220W lamp?
The 2,000-hour rated lamp life is the first hard limit; continuous operation beyond that point risks reduced brightness and possible shutdown until the module is swapped.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



