We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Hitachi, Ltd.

Hitachi, Ltd. PJ-658 165W Projector Lamp

SKU CH-YH8X-737R4

A new 165W replacement lamp module with assembled bulb and housing for straightforward projector installation

  • TypeProjector Lamp
  • Wattage165W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module with bulb and housing
  • 165W Philips UHB lamp delivers specified brightness
  • 2,000-hour rated life supports extended use
  • Manufactured to ISO 9001 quality standards
  • Compatible with Hitachi DT00751 projector models

Hitachi PJ-658 Replacement Lamp

The Hitachi PJ-658 is a 165W projector lamp module built with a new Philips UHB bulb inside a complete housing. It serves owners of compatible Hitachi projectors who need a direct replacement without separate bulb handling.

Assembled Housing for Simple Installation

The lamp arrives as a fully assembled unit combining bulb and housing, allowing straightforward installation without specialised tools. Manufacturing follows ISO9001 quality checks covering beam performance, ignition, voltage, appearance, connections and run-time.

165W UHB Lamp with 2,000-Hour Life

The 165W UHB bulb is rated for 2,000 hours of typical operation. Normal use produces the heat and fan noise expected from a 165W projector lamp, with power draw matching the stated wattage.

Highlights

  • Ready-to-install module with bulb and housing
  • 165W Philips UHB lamp delivers specified brightness
  • 2,000-hour rated life supports extended use
  • Manufactured to ISO 9001 quality standards
  • Compatible with Hitachi DT00751 projector models

Specifications

TypeProjector Lamp
Wattage165W
Lamp Life2,000 Hrs.

Questions about this item

What lamp standard does the PJ-658 use and what wattage does it cap at?

The module uses a UHB lamp rated at 165W, which is the maximum power the projector's ballast will drive.

What physical parts must fit inside the Hitachi projector for the PJ-658 module?

The assembly includes a pre-fitted Philips UHB 165W bulb inside a housing matched to the DT00751 form factor.

How is the lamp installed and which step do users often miss?

Power off and cool the projector, open the lamp door, remove the old module, insert the new PJ-658 until it seats firmly, close the door, then reset the lamp-hour counter in the menu.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.