Hitachi, Ltd.
Hitachi, Ltd. HCP-A102 210W Projector Lamp
Genuine compatible 210W replacement lamp module with pre-assembled bulb and housing for straightforward installation, rated for 5000 hours
- TypeProjector Lamp
- Wattage210W
- Lamp Life5,000 Hrs.
- Genuine compatible replacement ready for easy installation
- 210W UHP bulb delivers bright projection
- 5,000 hour lamp life reduces replacement frequency
- Manufactured to ISO 9001 quality standards
- Fits Hitachi projectors using DT01181 module
Genuine compatible 210W replacement lamp
The Hitachi HCP-A102 module supplies a complete 210W UHP bulb inside a ready-to-fit housing for Hitachi projectors. It matches the original DT01181 part and is built to ISO9001 quality checks for ignition, voltage and run-time. Ships new and ready for immediate installation.
For owners needing a direct-fit module
Suits users who want a drop-in replacement without handling bare bulbs or separate housings. Not for buyers who need a bare bulb only, a different wattage, or a lamp for a non-Hitachi projector model.
5,000-hour rated life at 210W
Delivers the full rated brightness for up to 5,000 hours in normal use. Headroom decreases as the lamp ages and brightness drops toward the end of the rated period. No higher-life or higher-wattage option is offered in this module.
Highlights
- Genuine compatible replacement ready for easy installation
- 210W UHP bulb delivers bright projection
- 5,000 hour lamp life reduces replacement frequency
- Manufactured to ISO 9001 quality standards
- Fits Hitachi projectors using DT01181 module
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 210W |
| Lamp Life | 5,000 Hrs. |
Questions about this item
Which Hitachi projector models accept the HCP-A102 lamp with part number DT01181?
The HCP-A102 lamp module is built for Hitachi projectors that specify part number DT01181; check your projector manual or the label inside the lamp door to confirm that number matches before purchasing.
Will the 210W UHP bulb in this module work in a projector that originally shipped with a lower-wattage lamp?
No, the 210W rating must match the projector's original specification; installing a lamp with different wattage can cause overheating or ignition failure.
After installing the lamp, how can I verify the 5,000-hour rated life is being tracked correctly?
Reset the lamp-hour counter in the projector's menu immediately after installation; the counter will then accumulate hours toward the 5,000-hour rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



