Hitachi, Ltd.
Hitachi, Ltd. HCP-500X Projector Lamp 165W 2000 Hrs
OEM replacement lamp module with Philips UHB 165W bulb and housing, rated for 2 000 hours on Hitachi HCP-500X projectors
- TypeProjector Lamp
- Wattage165W
- Lamp Life2,000 Hrs.
- Ready-to-install module with bulb and housing
- 165W UHB bulb matches original projector specs
- 2000-hour lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Compatible with Hitachi HCP-500X projector model
HCP-500X replacement lamp
This Hitachi HCP-500X projector lamp module combines a Philips UHB 165W bulb with a complete housing. It arrives ready for direct installation into compatible Hitachi projectors. The unit is supplied new and built to ISO9001 quality standards.
Upgrading from a dim or expired lamp
Replace the original module when brightness drops below usable levels or the projector indicates end of life. The 2000 hour rated lifespan restores full output for meeting rooms or classrooms. The jump is worth it when image quality affects presentations.
Simple module swap with no tools
The assembled bulb and housing slide into the projector after removing the lamp cover. No wiring or alignment is required beyond seating the module firmly. The most common issue is forgetting to reset the lamp timer in the projector menu after installation.
Highlights
- Ready-to-install module with bulb and housing
- 165W UHB bulb matches original projector specs
- 2000-hour lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Compatible with Hitachi HCP-500X projector model
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 165W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Will the pre-assembled housing fit the Hitachi HCP-500X projector without extra brackets?
The lamp module is a fully assembled bulb and housing designed for direct installation in the Hitachi HCP-500X, matching the original DT00751 form factor.
What is the correct way to seat the module so the projector recognises the new lamp?
Insert the module until it clicks firmly into the projector socket, then reset the lamp timer through the on-screen menu; skipping the timer reset is the step most users miss.
After roughly 2,000 hours of use, what part will need replacement?
The 165 W UHB bulb inside the housing reaches its rated 2,000-hour lifespan and the entire lamp module should be replaced to maintain brightness and colour accuracy.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



