We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare DLP projector lamp, Philips UHP 210W 140W .8 Arc E19.4

Hitachi, Ltd.

Hitachi, Ltd. HCP-3560X DLP Replacement Lamp 210W 140W .8 Arc 19.4

SKU CH-M5ZR-D4JJC

A genuine Philips UHP bare bulb rated at 210W and 140W with a .8 arc and 19.4 reflector for the Hitachi HCP-3560X projector

  • TypeProjector Lamps
  • Genuine Philips UHP bulb delivers superior light output
  • 210W power range matches original projector specification
  • 8 arc length ensures correct ignition parameters
  • E19.4 reflector shape fits Hitachi HCP-3560X cooling design
  • Bare bulb format replaces lamp without cage assembly

Genuine Philips UHP bulb for Hitachi HCP-3560X

This bare replacement lamp is built for the Hitachi HCP-3560X projector and uses a Philips UHP arc tube rated at 210W and 140W with a 0.8 mm arc and E19.4 reflector. It suits owners who need an exact OEM-spec bulb without the original cage assembly. Buyers who require a complete housing unit or a different projector fit will not be served by this part.

Sustained output and thermal stability

The bulb matches the required cooling setup to prevent overheating that can cause shattering or premature lumen decay. Correct driving mode and ignition parameters avoid flickering, colour shift and short life during extended projection sessions. Philips UHP technology delivers high luminance and uniform light distribution throughout the rated operating period.

Straightforward bare-bulb swap

Installation consists of fitting the bare UHP bulb into the existing cage, a process that demands care with the fragile arc tube and precise seating to maintain the 19.4 reflector alignment. The most common issues are touching the quartz envelope, misaligning the reflector or reusing worn cage hardware that compromises cooling. No tools beyond a basic screwdriver are typically needed.

Highlights

  • Genuine Philips UHP bulb delivers superior light output
  • 210W power range matches original projector specification
  • 8 arc length ensures correct ignition parameters
  • E19.4 reflector shape fits Hitachi HCP-3560X cooling design
  • Bare bulb format replaces lamp without cage assembly

Specifications

BrandHitachi
TypeProjector Lamps

Questions about this item

How much power does the 210W Philips UHP bulb draw when the projector runs all day?

The bare bulb operates at 210W and is matched to the Hitachi HCP-3560X cooling system so it runs within its designed thermal envelope without overheating.

Does the bare bulb need the original cage assembly from my old lamp to install in the Hitachi HCP-3560X?

Yes, this is a bare Philips UHP 210-140W 0.8 E19.4 bulb only; you must reuse the existing cage or housing from your current lamp module.

Will the 0.8 mm arc and E19.4 reflector match the ignition and colour performance of the original lamp in my HCP-3560X?

The genuine Philips UHP bulb uses the correct 0.8 mm arc gap, E19.4 reflector shape and ignition parameters to deliver the same luminance, colour accuracy and lamp life as the factory original.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.