Hitachi, Ltd.
Hitachi, Ltd. HCP-2250X 200W projector lamp
A complete 200W replacement lamp module with a new Philips UHP bulb inside its housing, rated for 3,000 to 4,000 hours and ready to install
- TypeProjector Lamp
- Wattage200W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Ready-to-install module with Philips UHP 200W bulb
- Up to 4000 hours lamp life in Economy mode
- 3000 hours lamp life in Normal mode
- Manufactured to ISO 9001 quality standards
- Compatible with Hitachi projectors using DT01141
Replacement lamp for Hitachi projectors
This 200 W module arrives fully assembled with a new Philips UHP bulb inside its housing. It matches the original DT01141 part number and is ready for immediate installation in compatible Hitachi projectors. The lamp delivers up to 3 000 hours in normal mode or 4 000 hours in economy mode. Each unit is built to ISO 9001 quality standards and tested for ignition, voltage and run-time.
Suitable for owners of supported Hitachi models
It suits users who want an OEM-grade light source without disassembling the old housing. Buyers whose projectors require a different wattage or connector should look elsewhere, as this module is specific to the 200 W HCP-2250X specification. Those seeking a bare bulb for self-assembly will also need a different product.
200 W Philips UHP lamp with 3 000 / 4 000 hour
The single decisive specification is the 200 watt Philips UHP light source rated for 3 000 hours in normal operation and 4 000 hours in economy mode. This wattage and lamp life determine whether the module matches the projector's original design and expected maintenance interval.
Highlights
- Ready-to-install module with Philips UHP 200W bulb
- Up to 4000 hours lamp life in Economy mode
- 3000 hours lamp life in Normal mode
- Manufactured to ISO 9001 quality standards
- Compatible with Hitachi projectors using DT01141
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 200W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Which Hitachi projectors accept the HCP-2250X lamp module?
The HCP-2250X lamp module is designed for Hitachi projectors that use the DT01141 lamp code; check your projector manual to confirm it lists this part number.
Can I keep my existing ceiling mount when swapping to this 200W lamp?
Yes, the HCP-2250X is a direct replacement module that fits the original lamp cage, so your current mount and projector chassis remain unchanged.
How do I verify the new lamp is running correctly after installation?
Reset the lamp hour counter in the projector menu, then confirm the display shows zero hours and the image reaches full brightness without flickering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



