Hitachi, Ltd.
Hitachi, Ltd. ED-X40 OEM Replacement Projector Lamp 210W
A new 210 W replacement lamp module with Philips UHP bulb and housing, rated for 3,000 hours normal or 6,000 hours economy use
- TypeProjector Lamp
- Wattage210W
- Lamp Life3,000 (Normal) - 6,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- 210W UHP lamp delivers bright, consistent projection
- Up to 3000 hours normal or 6000 hours economy lamp life
- Manufactured to ISO9001 quality standards
- Tested for beam performance, ignition and run-time
Ready-to-install lamp module
This replacement lamp module ships fully assembled with bulb and housing, so it fits straight into the Hitachi ED-X40 projector without extra steps. The unit uses a Philips UHP 210W bulb and delivers 3000 hours in normal mode or 6000 hours in economy mode. It is built to ISO 9001 quality standards and supplied new.
Ideal for single-projector maintenance
The module suits owners of the Hitachi ED-X40 who need a direct swap to restore brightness. It is not for users with a different projector model, nor for buyers who want a bare bulb without housing. Multi-projector fleets should verify the exact part number before ordering.
210-watt Philips UHP bulb
The lamp runs at 210 watts and provides the rated 3000 to 6000 hour life span depending on the selected power mode. This wattage determines compatibility with the ED-X40's ballast and cooling design.
Highlights
- Ready to install with pre-assembled bulb and housing
- 210W UHP lamp delivers bright, consistent projection
- Up to 3000 hours normal or 6000 hours economy lamp life
- Manufactured to ISO9001 quality standards
- Tested for beam performance, ignition and run-time
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 210W |
| Lamp Life | 3,000 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
Will the DT01021 housing fit my Hitachi ED-X40 projector without extra brackets?
The DT01021 module is a fully assembled bulb and housing built to the original specifications for the Hitachi ED-X40, so it seats directly in the projector's lamp compartment.
What is the installation step that people most often miss when swapping this 210W lamp?
After sliding the module in, the retaining screws must be tightened and the lamp-hour counter reset through the projector menu; skipping the reset leaves the old timer running.
How many hours can I expect from the Philips UHP 210W bulb before replacement?
The lamp is rated for 3000 hours in normal mode and 6000 hours in economy mode before the bulb should be changed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



