We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hitachi ED-A101 projector lamp module in black housing with 200W UHB bulb

Hitachi, Ltd.

Hitachi, Ltd. ED-A101 Projector Lamp 200W

SKU CH-5JXK-0MN00

A 200W replacement lamp module with Philips UHB bulb and housing, ready for easy installation in compatible Hitachi projectors, rated for 2,000 normal or 3,000 economy hours

  • TypeProjector Lamp
  • Wattage200W
  • Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
  • Ready to install with pre-assembled bulb and housing
  • Bright 200W UHB lamp for clear projection
  • Up to 3,000 hours life in economy mode
  • 2,000 hours normal use before replacement
  • Built to ISO 9001 quality standards

Hitachi ED-A101 200W Projector Lamp

The Hitachi ED-A101 is a 200W replacement projector lamp module supplied with a new Philips UHB bulb pre-fitted in its housing. It is designed for users who need a direct, ready-to-install light source for compatible Hitachi projectors.

Thermal output and power draw

The lamp operates at a rated 200W, which determines its heat output and electrical demand during normal projection. No separate cooling specifications or acoustic figures are provided for this module.

Rated lamp life under sustained use

In normal operating mode the lamp is rated for 2,000 hours of service, while an economy mode extends the rating to 3,000 hours. These figures reflect continuous running time rather than a short burst.

Highlights

  • Ready to install with pre-assembled bulb and housing
  • Bright 200W UHB lamp for clear projection
  • Up to 3,000 hours life in economy mode
  • 2,000 hours normal use before replacement
  • Built to ISO 9001 quality standards

Specifications

TypeProjector Lamp
Wattage200W
Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.

Questions about this item

How do I install the ED-A101 lamp module without damaging the connector pins?

Power off and unplug the projector, let it cool completely, remove the lamp cover screw, slide out the old module by its handle, align the new module's connector and housing rails, push firmly until seated, replace the cover and reset the lamp timer in the menu.

When should I replace the Philips UHB 200W bulb inside this housing?

Replace it after roughly 2000 hours in normal mode or 3000 hours in economy mode, or sooner if brightness drops noticeably or the projector warns that lamp life is exhausted.

What is the first limit reached during a long presentation with this 200W lamp?

The thermal protection circuit will shut the projector down if the cooling airflow is blocked or the ambient temperature gets too high, preventing the lamp from overheating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.