We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hitachi DT01145 projector lamp module with 200W UHP bulb in housing

Hitachi, Ltd.

Hitachi, Ltd. DT01145 200W Projector Lamp

SKU CH-MMQZ-8GY5E

Replacement lamp module with a 200W UHP bulb rated for 3,000 hours of use

  • TypeUHP
  • Wattage200W
  • Lamp Life3,000 hrs
  • Ready to install with pre-assembled bulb and housing
  • 200W UHP lamp delivers bright projection
  • Rated 3,000 hours of lamp life
  • Manufactured to ISO 9001 quality standards
  • Genuine Philips UHP bulb inside the module

Hitachi DT01145 200W Replacement Lamp

This Hitachi DT01145 module is a 200-watt UHP projector lamp supplied as a complete bulb-and-housing assembly. It is intended for users whose Hitachi projector has reached the end of its original lamp life and needs a direct, ready-to-fit replacement.

Replaces Worn Original Lamp at 3,000 Hours

The lamp is rated for 3,000 hours of operation and restores brightness when the existing module dims or fails. The upgrade is worthwhile once the projector warning indicates lamp end-of-life or image quality drops noticeably during presentations or home viewing.

Pre-Assembled Housing Enables Quick Swap

Because the bulb comes pre-mounted in its cage, installation requires only opening the projector lamp door, removing the old unit and sliding the new module into place. The most common issue is forgetting to reset the projector lamp timer after fitting, which leaves the replacement warning active.

Highlights

  • Ready to install with pre-assembled bulb and housing
  • 200W UHP lamp delivers bright projection
  • Rated 3,000 hours of lamp life
  • Manufactured to ISO 9001 quality standards
  • Genuine Philips UHP bulb inside the module

Specifications

BrandHITACHI
TypeUHP
Wattage200W
Lamp Life3,000 hrs

Questions about this item

Does the DT01145 lamp module come fully assembled with housing so it fits my Hitachi projector without extra parts?

Yes, the DT01145 arrives as a complete bulb-and-housing assembly designed to slide directly into compatible Hitachi projectors without additional components.

What is the correct sequence for installing the DT01145 lamp and the step users often miss?

Power off and unplug the projector, let it cool completely, remove the lamp cover, release the retaining screws, insert the new module until it clicks, tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most often forgotten.

How many hours of use can I expect before the 200 W UHP bulb in the DT01145 needs replacement?

The lamp is rated for 3,000 hours of operation; after that the bulb should be replaced to maintain brightness and avoid unexpected shutdowns.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.