Hitachi, Ltd.
Hitachi, Ltd. DT00461 Projector Lamp 150W 2000 Hrs
A new 150 W projector lamp module with a 2,000-hour rated life, supplied as a complete housing for quick installation
- TypeProjector Lamp
- Wattage150W
- Lamp Life2,000 Hrs.
- Ready-to-install module with Philips UHB 150W bulb
- 2000-hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Genuine OEM components from leading bulb makers
- Tested for beam performance, ignition and run-time
Direct replacement lamp for Hitachi projectors
The Hitachi DT00461 is a new 150W projector lamp module supplied as a fully assembled bulb and housing. It is intended for users whose Hitachi projector has reached the end of its original lamp life and who need a drop-in replacement that restores full brightness without additional assembly.
Pre-assembled housing with UHB bulb
The lamp arrives with the 150W Philips UHB bulb already seated in its housing, so installation is limited to opening the projector’s lamp door and sliding the module into place. Manufacturing follows ISO9001 quality checks covering beam performance, ignition, voltage, connections and run-time, ensuring consistent output from the first power-on.
Rated 2,000 hours at 150W
The lamp life is specified at 2,000 hours under normal operating conditions, giving a clear interval for planning the next replacement. Buyers who need longer rated life or a different wattage for another projector model should verify their unit’s requirements before ordering.
Highlights
- Ready-to-install module with Philips UHB 150W bulb
- 2000-hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Genuine OEM components from leading bulb makers
- Tested for beam performance, ignition and run-time
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 150W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
What wattage does the DT00461 lamp draw and how many hours is it rated for?
The lamp uses a 150W Philips UHB bulb and is rated for 2,000 hours of operation.
Does the DT00461 come as a bare bulb or a complete module that fits the projector housing?
It arrives as a fully assembled bulb-and-housing module that fits directly into the projector without extra parts.
What is the first step when installing the DT00461 lamp, and what do people often skip?
Power off and unplug the projector, then let it cool completely; many users skip the cooling wait and risk burns or damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



