We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hitachi DT00401 projector lamp module with Philips UHB 150W bulb in housing

Hitachi, Ltd.

Hitachi, Ltd. DT00401 Projector Lamp 150W 2000 Hrs

SKU CH-50TJ-KCT1Z

A 150W replacement lamp module with a 2,000-hour rated life for Hitachi projectors

  • TypeProjector Lamp
  • Wattage150W
  • Lamp Life2,000 Hrs.
  • OEM Philips UHB bulb delivers reliable 150W brightness
  • 2,000-hour lamp life supports extended projection sessions
  • Pre-assembled housing enables quick tool-free installation
  • Manufactured to ISO 9001 quality standards for consistent performance
  • Genuine replacement module ensures full compatibility with Hitachi projectors

Ready-to-install 150 W replacement module

The Hitachi DT00401 is a complete lamp-and-housing assembly built around a new Philips UHB 150 W bulb. It fits directly into compatible Hitachi projectors without additional tools or alignment steps. The unit is supplied new and manufactured to ISO 9001 quality standards. Buyers who need a bare bulb without housing should look elsewhere.

150 W draw with 2 000-hour rated life

At the rated 150 W the lamp delivers its specified 2 000 hours of operation under normal projector use. Power consumption and thermal output match the original equipment design, so existing cooling and power circuits handle the load unchanged. Acoustic profile remains consistent with the factory lamp because the housing and bulb geometry are identical. Projectors that demand higher wattage or longer rated life cannot use this module.

Direct swap for expired DT00401 lamps

This module replaces a depleted Hitachi DT00401 lamp in the same projector models that shipped with it. The upgrade is worthwhile when the original lamp has reached its hour limit or shows dimming and colour shift. It does not increase brightness beyond the projector’s native specification, nor does it add features such as networking or lens shift. Installers needing a different connector type or form factor must choose another part.

Highlights

  • OEM Philips UHB bulb delivers reliable 150W brightness
  • 2,000-hour lamp life supports extended projection sessions
  • Pre-assembled housing enables quick tool-free installation
  • Manufactured to ISO 9001 quality standards for consistent performance
  • Genuine replacement module ensures full compatibility with Hitachi projectors

Specifications

TypeProjector Lamp
Wattage150W
Lamp Life2,000 Hrs.

Questions about this item

How do I install the DT00401 lamp module without damaging the 150W Philips UHB bulb?

Power off and cool the projector completely, then remove the lamp cover, release the retaining screws, pull the old module straight out, insert the new DT00401 housing until it seats firmly, re-tighten screws, replace the cover, and reset the lamp timer in the menu.

What part will need replacement after roughly 2000 hours of use?

The entire DT00401 lamp module — housing and 150W Philips UHB bulb together — reaches rated life at 2000 hours and must be swapped as a unit; no separate bulb change is possible.

What limit appears first when the projector runs continuously at full brightness?

The 150W UHB lamp reaches its 2000-hour rated lifespan before any other component, after which brightness drops and ignition may become unreliable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.