Hitachi, Ltd.
Hitachi, Ltd. DT00331 Projector Lamp 160W 2000 Hrs
A 160-watt replacement lamp module with 2,000-hour life and pre-assembled housing for quick installation
- TypeProjector Lamp
- Wattage160W
- Lamp Life2,000 Hrs.
- New Hitachi DT00331 lamp module installs instantly
- 160W UHB bulb delivers correct brightness for your projector
- Rated 2000 hours lamp life for extended use
- Built to ISO 9001 quality standards for reliable performance
- Supplied as complete housing for tool-free replacement
What this lamp replaces
The Hitachi DT00331 is a new 160W UHB projector lamp module supplied as a complete bulb-and-housing assembly for direct replacement in compatible Hitachi projectors. It is intended for owners who need a ready-to-install light source without separate handling of the bare bulb. Buyers who require a different wattage or a bare bulb only will need another product.
Thermals noise and power
The lamp draws 160W during normal operation, which determines the heat output and fan activity of the projector. No separate acoustic or thermal ratings are provided for the lamp itself. Projectors that are not designed for a 160W UHB module may run hotter or louder than expected.
Sustained use over 2000 hours
Rated life is 2000 hours under standard operating conditions, representing typical brightness maintenance across extended sessions rather than a short-burst figure. Actual runtime varies with projector usage patterns, cooling efficiency and power-cycle frequency. The lamp is manufactured to ISO 9001 quality checks for ignition, voltage stability and run-time consistency.
Highlights
- New Hitachi DT00331 lamp module installs instantly
- 160W UHB bulb delivers correct brightness for your projector
- Rated 2000 hours lamp life for extended use
- Built to ISO 9001 quality standards for reliable performance
- Supplied as complete housing for tool-free replacement
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 160W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How do I install the DT00331 lamp module, and what step do people often miss?
The module arrives as a fully assembled bulb and housing. Power off and unplug the projector, let it cool completely, remove the old lamp cage, insert the new module until it seats firmly, then secure the retaining screws before replacing the cover.
What maintenance or replacement will the DT00331 need after the 2000-hour rated life?
The UHB 160W bulb dims gradually over its 2000-hour rating. Once brightness drops below an acceptable level, replace the entire lamp module; no separate filter or bulb-only change is required for this design.
What limit appears first during long sessions with the 160W lamp?
The 160W UHB bulb generates significant heat, so the projector's thermal protection will trigger a shutdown if airflow is restricted or ambient temperature is too high, well before the 2000-hour lamp-life limit is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



