Hitachi, Ltd.
Hitachi, Ltd. CPX310LAMP 160W Projector Lamp 2000 Hrs
A new 160 W replacement lamp module with housing, rated for 2,000 hours of use
- TypeProjector Lamp
- Wattage160W
- Lamp Life2,000 Hrs.
- Ready-to-install module with 160W UHB bulb and housing
- 2,000-hour lamp life supports extended projection sessions
- Genuine Hitachi CPX310LAMP replacement ensures exact fit
- Manufactured to ISO 9001 quality standards for reliable performance
- New OEM component delivers consistent brightness and ignition
Direct replacement lamp
The Hitachi CPX310LAMP is a 160W projector lamp module built with a new UHB bulb inside a complete housing. It is designed for owners of compatible Hitachi projectors who need a ready-to-install replacement without separate bulb handling.
OEM-grade build and simple mounting
The module arrives fully assembled, so installation only requires seating the housing in the projector’s lamp bay. Each unit is produced under ISO 9001 quality controls and tested for beam performance, ignition, voltage, connections and run-time before it ships.
2,000-hour service interval
At the rated 2,000 hours the lamp will reach the end of its specified life and require another replacement. The 160W rating fixes both power draw and brightness output, so the projector’s original lumen performance is maintained but cannot be exceeded.
Highlights
- Ready-to-install module with 160W UHB bulb and housing
- 2,000-hour lamp life supports extended projection sessions
- Genuine Hitachi CPX310LAMP replacement ensures exact fit
- Manufactured to ISO 9001 quality standards for reliable performance
- New OEM component delivers consistent brightness and ignition
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 160W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
What wattage does the 160W UHB lamp draw in the CPX310LAMP module?
The lamp draws 160W, matching the original specification for compatible Hitachi projectors.
Does the CPX310LAMP unit include a housing so it fits the projector without extra parts?
Yes, it ships as a fully assembled bulb and housing module ready for direct installation.
What is the correct order of steps when installing the CPX310LAMP, and which step is most often missed?
Power off and cool the projector, remove the lamp cover, release the retaining screws, swap the module, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most often missed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



