We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hitachi CP-X880 projector lamp module with 275W UHB bulb in housing

Hitachi, Ltd.

Hitachi, Ltd. CP-X880 Projector Lamp 275W 2000 Hrs

SKU CH-ESMH-6DSW2

A 275W UHB replacement lamp module rated for 2000 hours of projector use

  • TypeProjector Lamp
  • Wattage275W
  • Lamp Life2,000 Hrs.
  • Genuine Ushio 275W bulb delivers bright, reliable projection
  • 2000-hour rated life supports extended use between replacements
  • Pre-assembled module fits Hitachi CP-X880 for quick installation
  • ISO 9001 manufacturing ensures consistent beam performance and ignition
  • OEM-compatible design matches original DT00531 specifications

Direct replacement for CP-X880 projectors

This Hitachi projector lamp module uses the DT00531 part number and arrives as a complete bulb-and-housing assembly. The unit contains a 275W UHB bulb rated for 2,000 hours of operation. It is designed for owners of the CP-X880 who need a drop-in replacement without separate housing installation.

Replaces a dim or expired original lamp

When the existing lamp reaches its rated 2,000 hours or shows significant brightness loss, this module restores the projector’s output. The jump is worth it when the current lamp fails to ignite, displays colour shifts, or triggers the projector’s replacement warning. It is not for users seeking a higher-wattage upgrade or a different lamp technology.

Fits the CP-X880 housing and power supply

The assembled module slides into the projector’s existing lamp compartment and connects to the factory power circuit. No additional wiring, ballast changes or firmware updates are required. It frees the user from handling a bare bulb and aligns with the projector’s original thermal design.

Highlights

  • Genuine Ushio 275W bulb delivers bright, reliable projection
  • 2000-hour rated life supports extended use between replacements
  • Pre-assembled module fits Hitachi CP-X880 for quick installation
  • ISO 9001 manufacturing ensures consistent beam performance and ignition
  • OEM-compatible design matches original DT00531 specifications

Specifications

TypeProjector Lamp
Wattage275W
Lamp Life2,000 Hrs.

Questions about this item

Does the DT00531 lamp module include the housing so it fits the CP-X880 without extra parts?

Yes, the module ships with a new Ushio UHB 275W bulb already mounted in its housing, so it installs directly into the projector.

Which screw or latch must be released first when swapping the lamp in the CP-X880?

Loosen the single lamp-cover screw on the projector bottom, lift the cover, then pull the module handle straight out — skipping the cover screw is the common error.

After roughly 2000 hours of use, what part needs replacement to restore brightness?

The entire DT00531 lamp module (bulb plus housing) should be replaced once the rated 2000-hour life is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.