Hitachi, Ltd.
Hitachi, Ltd. CP-X8160 projector lamp 330W 2500 hrs
A 330 W replacement lamp module with 2 500-hour rated life for Hitachi CP-X8160 projectors
- TypeProjector Lamp
- Wattage330W
- Lamp Life2,500 Hrs.
- Ready-to-install module saves setup time
- 330 W UHP bulb matches original brightness
- 2 500-hour rated life reduces replacements
- Built to ISO 9001 quality standards
- OEM-grade component ensures reliable ignition
Ready-to-install 330 W lamp module
This replacement module for the Hitachi CP-X8160 projector ships with a new Philips UHP 330 W bulb already mounted in its housing. The complete assembly removes the need to handle a bare lamp or align reflectors during a changeover. It is intended for owners of the CP-X8160 who want a direct swap without tools.
OEM-grade housing and ISO 9001 checks
Each unit is built to ISO 9001 standards and tested for beam performance, ignition voltage, connections and run-time before it leaves the factory. The pre-assembled housing ensures the connector seats securely and the lamp sits at the correct focal point every time. No separate cage or bracket is required for installation.
Restores original brightness after 2 500 hours
When the original lamp reaches its rated 2 500-hour life, this module returns the projector to its factory light output and colour balance. The jump is worth it when dimming or colour shift starts to affect presentations or classroom use. Buyers who need a different wattage or a bare bulb only will not be served by this assembled unit.
Highlights
- Ready-to-install module saves setup time
- 330 W UHP bulb matches original brightness
- 2 500-hour rated life reduces replacements
- Built to ISO 9001 quality standards
- OEM-grade component ensures reliable ignition
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 330W |
| Lamp Life | 2,500 Hrs. |
Questions about this item
What wattage does the 330W lamp draw in the CP-X8160 projector?
The replacement module uses a 330W Philips UHP bulb, so the projector will draw 330W when the lamp is operating at full brightness.
Which housing matches the Hitachi CP-X8160 for a direct fit?
The lamp module carries the manufacturer part number DT01291 and is supplied as a fully assembled bulb-and-housing unit designed to slot straight into the CP-X8160.
What is the correct installation step that owners often skip after fitting the new lamp?
After inserting the DT01291 module you must reset the projector’s lamp-hour counter through the on-screen menu so the 2,500-hour timer starts from zero.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



