We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Hitachi, Ltd.

Hitachi, Ltd. CP-X5550 Projector Lamp 300W UHP

SKU CH-06H1-CB4S3

Genuine 300 W UHP replacement lamp module with bulb and housing pre-assembled for immediate installation in compatible Hitachi projectors

  • TypeUHP
  • Wattage300W
  • Ready to install with pre-assembled housing
  • 300 W UHP bulb for bright projection
  • Manufactured to ISO 9001 quality standards
  • OEM Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita bulb
  • Tested for beam performance, ignition and run-time

Direct replacement for CP-X5550 projectors

This Hitachi CP-X5550 replacement lamp module fits the CP-X5550 projector series. It arrives as a fully assembled bulb and housing unit so you can swap it without handling a bare lamp. The module uses a 300W UHP bulb sourced from Philips.

Upgrade from a dim or expired original lamp

Replace the original lamp when brightness has dropped noticeably or the projector warns that lamp life is ending. The jump is worth it when image quality no longer meets the needs of presentations or classroom use.

Tool-free installation in minutes

The pre-assembled housing slides into the projector lamp compartment and locks without tools. The most common issue is forgetting to reset the lamp-hour counter after installation, which leaves the replacement warning active.

Highlights

  • Ready to install with pre-assembled housing
  • 300 W UHP bulb for bright projection
  • Manufactured to ISO 9001 quality standards
  • OEM Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita bulb
  • Tested for beam performance, ignition and run-time

Specifications

BrandHITACHI
TypeUHP
Wattage300W

Questions about this item

What housing does the DT01931 lamp module use for the CP-X5550 projector?

The module ships as a fully assembled bulb and housing matched to the CP-X5550, so it seats directly in the projector lamp compartment without extra parts.

Which step do installers most often miss when fitting the 300 W UHP lamp?

After sliding the module in, the retaining screws must be fully tightened and the lamp cover latched; otherwise the projector will not reset the hour counter.

When should the 300 W UHP bulb be replaced?

Replace the lamp when the projector warning appears or image brightness drops noticeably; the UHP bulb is rated for typical projector service intervals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.