Hitachi, Ltd.
Hitachi, Ltd. CP-X450 DT00841 220W 2000H projector lamp
Replacement projector lamp module with 220W UHB bulb rated for 2,000 hours, supplied fully assembled for quick installation
- TypeProjector Lamp
- Wattage220W
- Lamp Life2,000 Hrs.
- Ready-to-install module saves setup time
- 220W UHB bulb matches original brightness
- 2000-hour rated life reduces replacement frequency
- Built to ISO 9001 quality standards for reliable operation
- Genuine OEM components ensure projector compatibility
Ready-to-install lamp module
The Hitachi CP-X450 DT00841 is a new 220W replacement projector lamp supplied as a fully assembled bulb and housing. It is designed for owners of compatible Hitachi projectors who need a direct swap without handling a bare bulb. The module arrives ready to fit, reducing downtime during maintenance.
UHB 220W bulb rated for 2000 hours
The lamp uses a UHB 220W bulb with a rated life of 2,000 hours under normal operating conditions. Power draw remains steady at 220W, so thermal output and fan noise stay consistent with the projector's original design. No change to the cooling profile is required.
ISO 9001 manufacturing and OEM sourcing
Each unit is produced to ISO 9001 quality standards and sourced from original bulb manufacturers such as Ushio, Philips, Osram, Phoenix, Iwasaki or Matsushita. The pre-assembled housing ensures correct alignment and secure connector engagement during installation. Buyers who need a bare bulb for custom housing reuse cannot use this module.
Highlights
- Ready-to-install module saves setup time
- 220W UHB bulb matches original brightness
- 2000-hour rated life reduces replacement frequency
- Built to ISO 9001 quality standards for reliable operation
- Genuine OEM components ensure projector compatibility
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 220W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How is the CP-X450 lamp module installed and what step is often missed?
The module arrives fully assembled with the 220W Ushio UHB bulb inside its housing. Power off the projector, let it cool completely, open the lamp door, remove the old unit, slide the new module in until it seats firmly, close the door, then reset the lamp-hour counter in the menu — skipping the reset is the step most people forget.
What maintenance or replacement will the DT00841 lamp need later?
The lamp is rated for 2000 hours of use. When the projector’s lamp-hour counter approaches that figure or the on-screen replacement warning appears, the entire module must be swapped for a new one; no user-serviceable parts exist inside the housing.
What limit appears first during sustained operation of this 220W lamp?
The 2000-hour rated lifespan is the primary limit; after that point brightness drops and ignition reliability falls, so the module should be replaced even if it still strikes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



