Hitachi, Ltd.
Hitachi, Ltd. CP-X4030WN projector lamp 225W
Replacement lamp module with 225W UHP bulb delivers 5,000 to 6,000 hours of projection life
- TypeUHP
- Wattage225W
- Lamp Life5,000 (Normal) - 6,000 (Economy) Hrs.
- Ready-to-install module with Philips UHP 225W bulb
- Up to 6000 hours lamp life in Economy mode
- OEM quality built to ISO 9001 standards
- Compatible with Hitachi CP-X4030WN projectors
- 180-day warranty for peace of mind
Compatible replacement lamp module
The Hitachi CP-X4030WN lamp module ships as a fully assembled 225W UHP bulb inside its housing, ready for tool-free installation in the matching projector. It is intended for owners of that specific model who need a new light source without sourcing bare bulbs or separate cages.
Replaces the original factory lamp
The unit serves as a direct substitute for the projector’s original lamp when brightness fades or the hour counter reaches its limit. Swapping it restores full output for another 5000 hours in normal mode or 6000 hours in economy mode, making the change worthwhile once image quality drops below acceptable levels.
UHP lamp practical limits
The ultra-high-pressure 225W design delivers rated life only when the projector’s cooling and power circuits operate within specification; blocked filters or unstable mains voltage can shorten actual runtime. Buyers who need longer intervals between replacements or a different wattage will find this module does not meet those requirements.
Highlights
- Ready-to-install module with Philips UHP 225W bulb
- Up to 6000 hours lamp life in Economy mode
- OEM quality built to ISO 9001 standards
- Compatible with Hitachi CP-X4030WN projectors
- 180-day warranty for peace of mind
Specifications
| Brand | HITACHI |
|---|---|
| Type | UHP |
| Wattage | 225W |
| Lamp Life | 5,000 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
Does the DT01481 module include the housing so it fits the CP-X4030WN without extra parts?
Yes, the lamp arrives as a fully assembled bulb and housing matched to the CP-X4030WN, so it seats directly in the projector's lamp compartment without additional brackets or adapters.
What is the correct reset step after sliding the 225W UHP lamp into the CP-X4030WN?
After installation, power on the projector and use the menu to reset the lamp-hour counter to zero; skipping this step leaves the timer at the old value and can trigger premature replacement warnings.
When should I plan to replace the lamp if I run the CP-X4030WN in Economy mode?
In Economy mode the 225W UHP lamp is rated for approximately 6000 hours; schedule a replacement as the counter approaches that figure to maintain brightness and avoid unexpected shutdown.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



