Hitachi, Ltd.
Hitachi, Ltd. CP-X4020E projector lamp DT01051 260W UHB
Genuine compatible 260W UHB replacement lamp module with 2,000 to 4,000 hour life for easy installation
- TypeProjector Lamp
- Wattage260W
- Lamp Life2,000 (Normal) - 4,000 (Economy) Hrs.
- Genuine compatible replacement for Hitachi CP-X4020E projectors
- Ready-to-install module with 260W UHB bulb and housing
- 2000 hours normal life extends to 4000 hours in economy mode
- Manufactured to ISO 9001 quality standards for reliable performance
- New condition ensures full brightness and rated lifespan from day one
Genuine replacement lamp for CP-X4020E
This 260W UHB lamp module is a new, ready-to-install replacement for the Hitachi CP-X4020E projector. It includes the bulb and housing fully assembled, matching the original DT01051 specification for direct compatibility.
Upgrades from a dim or expired module
Replace the lamp when brightness drops, colours shift or the projector signals end of life. The step up is worthwhile once the original lamp reaches its rated hours or shows visible degradation in normal use.
Rated 2000 hours normal and 4000 hours economy
Under sustained operation the lamp delivers 2000 hours in normal mode and up to 4000 hours in economy mode. Each unit is tested for beam performance, ignition, voltage and run-time to ISO9001 standards before shipment.
Highlights
- Genuine compatible replacement for Hitachi CP-X4020E projectors
- Ready-to-install module with 260W UHB bulb and housing
- 2000 hours normal life extends to 4000 hours in economy mode
- Manufactured to ISO 9001 quality standards for reliable performance
- New condition ensures full brightness and rated lifespan from day one
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 260W |
| Lamp Life | 2,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
What Hitachi projector models accept the DT01051 lamp module?
The DT01051 is built for the CP-X4020E projector and fits that model directly.
What is the correct sequence for installing the CP-X4020E replacement lamp?
Power off the projector, allow it to cool completely, remove the lamp cover, loosen the retaining screws, slide out the old module, insert the new DT01051 assembly, tighten the screws, replace the cover, then reset the lamp timer in the menu.
When should I plan to replace the 260W UHB bulb based on the rated hours?
Expect roughly 2000 hours in normal mode or 4000 hours in economy mode before brightness drops enough to warrant a new lamp module.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



