Hitachi, Ltd.
Hitachi, Ltd. CP-X3W Projector Lamp 190W 2000 Hrs
Replacement projector lamp module with a 190 W UHB bulb rated for 2,000 hours of use
- TypeProjector Lamp
- Wattage190W
- Lamp Life2,000 Hrs.
- Ready to install with pre-assembled housing
- 190W UHB bulb delivers specified brightness
- Rated 2000 hours of projection time
- Manufactured to ISO 9001 quality standards
- Genuine OEM Philips bulb inside the module
Replacement Lamp for Hitachi CP-X3W
This 190 W replacement lamp module is built for the Hitachi CP-X3W projector. It ships as a complete bulb-and-housing assembly so the projector can return to service quickly. The lamp is rated for 2,000 hours of operation. Buyers who need a higher-wattage module or a different connector will not be served by this part.
Ready-to-Install Module
The lamp arrives fully assembled, eliminating the need to handle a bare bulb or align a separate housing. Installation follows the projector’s standard lamp-door procedure and requires no special tools. The only common issue is forgetting to reset the projector’s internal hour counter after fitting the new module. Buyers who prefer to swap only the bare bulb should look elsewhere.
UHB 190 W Light Source
The lamp uses a 190 W ultra-high-pressure mercury bulb designed to the projector’s optical specifications. Brightness and colour balance are calibrated for the CP-X3W’s engine; using the lamp in a different model will produce incorrect output. The 2,000-hour rating reflects typical use at standard power; eco modes may extend runtime while high-brightness modes reduce it. Buyers who need a longer-rated lamp must choose a different projector platform.
Highlights
- Ready to install with pre-assembled housing
- 190W UHB bulb delivers specified brightness
- Rated 2000 hours of projection time
- Manufactured to ISO 9001 quality standards
- Genuine OEM Philips bulb inside the module
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 190W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How can I confirm the 190W lamp is performing correctly after installation?
The projector should power on without flickering, reach full brightness quickly, and display a stable image; the built-in lamp timer will begin counting toward the 2,000-hour rated life.
What comes in the box and is anything else required for installation?
The module includes a new Philips UHB 190W bulb pre-assembled in its housing (Hitachi part DT00821), so no separate bulb or tools are needed.
Which of the four available versions should I choose for my CP-X3W projector?
All four versions — three OEM options (original bulb maker, Hitachi-sourced, or alternate OEM) and one compatible — are built to ISO 9001 standards and fit the CP-X3W; pick based on budget and brand preference.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



