Hitachi, Ltd.
Hitachi, Ltd. CP-X340 Projector Lamp DT00671 165W 2000 Hrs
A ready-to-install 165 W replacement lamp module rated for 2 000 hours of use
- TypeProjector Lamp
- Wattage165W
- Lamp Life2,000 Hrs.
- Ready-to-install module saves setup time
- Philips UHB 165W bulb delivers rated brightness
- 2000-hour lamp life extends replacement intervals
- Manufactured to ISO 9001 quality standards
- Compatible with Hitachi CP-X340 projectors
Ready-to-install replacement lamp
The Hitachi CP-X340 replacement module ships as a complete 165 W bulb-and-housing assembly so it fits straight into the projector without extra steps. It uses a Philips UHB lamp rated for 2,000 hours of operation and is built to ISO 9001 quality checks for ignition, voltage and beam performance. The unit is supplied new and ready for immediate use.
Direct OEM swap for the DT00671 module
This lamp replaces the original Hitachi DT00671 module when brightness drops or the projector signals end-of-life. The 165 W rating matches the factory specification so the upgrade restores rated output without changing projector settings. It is worth fitting when the existing lamp reaches its 2,000-hour limit or shows colour shift and hot-spotting.
Fits Hitachi CP-X340 projectors
The module is designed for the CP-X340 chassis and requires no adapter, wiring change or firmware update. Installing the pre-assembled housing frees the user from handling a bare bulb and eliminates alignment hassles. No additional tools or consumables are needed beyond the projector itself.
Highlights
- Ready-to-install module saves setup time
- Philips UHB 165W bulb delivers rated brightness
- 2000-hour lamp life extends replacement intervals
- Manufactured to ISO 9001 quality standards
- Compatible with Hitachi CP-X340 projectors
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 165W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Does the DT00671 lamp module come pre-assembled in its housing for the CP-X340?
Yes, the module is supplied as a fully assembled 165W bulb and housing ready for direct installation in the Hitachi CP-X340 projector.
What is the correct procedure to reset the lamp timer after fitting the DT00671 module?
After installation, access the projector menu and reset the lamp-hour counter to zero so the 2000-hour rating is tracked accurately.
When should the DT00671 lamp be replaced based on its rated life?
Plan replacement around 2000 hours of use, or sooner if brightness drops noticeably or the projector indicates end-of-life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



